Contact Platform Support
Help CenterS9-M 1000KVA 24KV KV/0.4KV Oil Filled Three Phase Distribution Transformer
Related Products
-
Factory Wholesale 3 Phase Power Transformer ce ApprovedUS$ 300 - 990,000MOQ: 1 Set -
Best Price 10KV 500Kva Three Phase Oil Immersed Distribution TransformerUS$ 300 - 990,000MOQ: 1 Set
-
S9-M 315KVA 24KV/0.415KV Oil Immersed Three Phase Electrical TransformerUS$ 500 - 5,000MOQ: 1 Set
-
S9-M 400KVA 24KV/0.415KV Oil Immersed Three Phase Electrical TransformerUS$ 500 - 5,000MOQ: 1 Set
-
10kv Oil Immersed Step Down up Distribution Dyn11 Electrical TransformerUS$ 300 - 990,000MOQ: 1 Set
S9-M 1000KVA 24KV KV/0.4KV oil filled three phase distribution transformer
S9-M 1000KVA 24KV KV/0.4KV oil filled three phase distribution transformer
I. Introduction:
1.Iron core pole is rolled by HV & LV, which maked the winding solid.
2.Corrugated panel radiator, when temperature change, it could replace the oil conservator.
3.Iron core structure is made of 3 phase 3 pole inside and outside roll with high machine strength.
4.A fully enclosed structure transformer tank, fuel tank along with the boxes available Bolt or welded, transformer oil is not in contact with air to extend the service life.
II.Working condition:
1.Altitude cannot exceed: 1000m
2.Lowest outdoor temperature: -25°C
3.Highest ambient temperature: +40°C
4.Highest daily average temperature: +30°C
5.Highest annual average temperature: +20°C
S9-M 1000KVA 24KV KV/0.4KV oil filled three phase distribution transformer advantage:
1. Low loss, and significantly energy-saving.
2. The core laminations are made up from high-quality cold-rolled grain-oriented silicon steel sheets
3. Zigzag directed flow of oil are provided within the windings
4. The regulating winding is a separate winding which apart from the high voltage main winding
5. The windings of one phase are assembled into an integral phase block before placing into the core.
6. Core frames in the form of a flat plate are used for clamping the core.
7.Transformer tanks are fabricated with steel plates wide enough so that there are no weld joints on each surface.
8.Diaphragm membrane is provided within the conservator, preventing direct contact of oil with air, protecting the oil from aging
9.Reliably sealed, and fine machined for sealed surface.
10. Quality assurance rules are also observed for all insulating parts,and main components.
S9-M 1000KVA 24KV KV/0.4KV oil filled three phase distribution transformer Details:
Related Transformer product in our company
Please click the following link for detailed information if there is any interest
OUR SERVICE:
1 .Customized design depends on your requirement. OEM is welcomed.
2 .Reply your inquiry in half of hour,24 hours on line.
3.Special discount and protection of sales area provided to our distributor.
4.Warranty:1year.
Contact person: Ms.Kayla Wang
Tel: +86-312-6775757
Fax: +86-312-6775656
Whatsapp: +8615822478551
Skype: sales02(at)
Click following " Send " for more detailed informaiton and price directly!
Thank you!! :)
Send Inquiry to This Supplier
You May Also Like
-
DANFOSS Controller MCX08M080G0310NegotiableMOQ: 1 Piece
-
Toroidal Transformer for Cable Pusher, Cable Conveyor, Cable Puller Machine – Professional Industrial Power Supply ComponenUS$ 100 - 200MOQ: 1 Unit
-
Custom Compact 1000kVA 20kv Oil Immersed TransformerNegotiableMOQ: 50 Sets
-
CEEG China Hermetically Sealed Oil Transformer - Weatherproof, Corrosion Resistant Tank, Low Maintenance, for Outdoor InstallationNegotiableMOQ: 1 Unit
-
Power TransformerNegotiableMOQ: 2000 Pieces
-
ABB DSTDN020 3BSE003238R1NegotiableMOQ: 1 Piece
-
WOODWARD 8901-457 – Industrial Control Module for Engine/Turbine Protection and Speed ManagementNegotiableMOQ: 1 Bag
-
Motorola MVME167-34B VME Bus Single-board ComputerNegotiableMOQ: 1 Piece
-
Yaskawa JEPMC-MP2300S-E Machine Controller MP2300NegotiableMOQ: 1
-
Wholesale High Quality New Surge Arrestor (SP-D10)US$ 0.01 - 0.02MOQ: 1 Piece
