Contact Platform Support
Help CenterSCB10 20kv 500kva Dry Type Transformer Cast Resin Power Transformer
Related Products
-
SCB10 11kv 315kva Dry Type Transformer Cast Resin Power TransformerUS$ 1,000 - 99,000MOQ: 1 Set -
220V 3 PHASE ISOLATION TRANSFORMERUS$ 1,000 - 500,000MOQ: 1 Set
-
High Voltage SC11 100kva Dry Type Power Distribution TransformerUS$ 1,000 - 500,000MOQ: 1 Set
-
Dyn11 3 Phase Step Down Dry Type Electrical Low Voltage TransformerUS$ 1,000 - 500,000MOQ: 1 Set
-
11kv 1mva Resin Epoxy Cast Dry-type Power TransformersUS$ 1,000 - 500,000MOQ: 1 Set
SCB10 20kv 500kva dry type transformer Cast resin power transformer
The Hot sell SCB10 20kv 500kva dry type transformer Cast resin power transformer have the following characteristics:
- Windings have high mechanical strength and no partial discharge.
- Epoxy resin and insulating materials used for windings are non-flammable, will not burn from an electric arc, and no toxic gases will be given off when the resin is burned.
- Envionmental adaptability with windings that will not absorb moisture and a special anti-rust protective coating that seals the core and frame.
- Operates under one-hundred percent relative humidity and other severe ambient conditions.
- Ability to switch on the device without pre-drying or long periods of service interruptions.
- Excellent short-circuit and lighting impulse strength.
- Cooled naturally by air (AN) and forced air cooling (AF) provided as an option to improve overload capacity.
- Smaller dimensions, less weight, and space saving.
- Oil drainage pits and fire extinguishing devices not required for operation.
Hot sell SCB10 20kv 500kva dry type transformer Cast resin power transformer Details
Short electrical impedance:
standard impedance (refer to performance data)
The altitude is supposed to be lower than 1000m, the ambient temperature is lower than 40centigrade, the corresponding rating regulation is suggested to be done according to standard provided beyond above operation condition.
Insulation level:
1.The power frequency withstand voltage of 10KV class product is 35KV, lightning impulse voltage is 75kv
2.The power frequency withstand voltage of 20KV class product is 50KV, lightning impulse voltage is 125kv
Related Transformer product in our company
Please click the following link for detailed information if there is any interest
Workshop for Dry Type Power Transformer
Certificate for Hot sell SCB10 20kv 500kva dry type transformer Cast resin power transformer
Contact person: Ms.Kayla Wang
Tel: +86-312-6775757
Fax: +86-312-6775656
Whatsapp: +8615822478551
Skype: sales02(at)
Click following " Send " for more detailed informaiton and price directly!
Thank you!! :)
Send Inquiry to This Supplier
You May Also Like
-
DANFOSS Controller MCX08M080G0310NegotiableMOQ: 1 Piece
-
China Factory Epoxy Resin Casting HV Power Distribution Dry-type Transformer 3 Phase 500 Kva 100kva TransformerNegotiableMOQ: 50 Sets
-
CEEG China Amorphous Core Dry-Type Transformer - Ultra Low No-Load Loss (Up to 70% Savings), High Efficiency, Custom KVANegotiableMOQ: 1 Unit
-
ABB DSTDN020 3BSE003238R1NegotiableMOQ: 1 Piece
-
WOODWARD 8901-457 – Industrial Control Module for Engine/Turbine Protection and Speed ManagementNegotiableMOQ: 1 Bag
-
ABB 1SBL177001R1101 AF16-30-01-11 ContactorNegotiableMOQ: 1 Piece
-
Omron Temperature Controller E5CC-RX3A5M-000NegotiableMOQ: 1 Piece
-
Omron Thermostat E5CSL-RTCNegotiableMOQ: 1 Piece
-
100% New Omron PLC Digital Input Unit CJ1W-ID211 StockNegotiableMOQ: 1 Piece
-
Original Honeywell Burner Ignition Controller TBC2800A1000 for Burner Spare PartNegotiableMOQ: 1 Piece
