Glass Bathroom Scale

Specifications

Specifications

Glass bathroom scale
Capacity:150kg/330lb
Indicator:LCD display
High precision strain gauge sensors syste
Auto on/Atuo off

Glass bathroom scale

Features:
1) Model: ZZJKB-01-3
2) Material: toughened glass and alloy
3) Weighing capability: 150kg (330lbs) Graducation: 0.1kg

5) Unit: IB and KG

6) Display: 4Digits LCD

7) Battery: 3V CR2032 Li

8) Turn on auto& Switch by shake

9) Turn off after 10 seconds

10) Hint of low- tension: "L0-"

11) Hint of wrong:"---"

12) Hint of out: "0-ld"

Operate explain

• Vibrates starting: After switch on,”8” will display and it will move from left to right until “0.0” appears, then starts weighing.

• On automatic calls: After starting, demonstrated that “8888”, then demonstrated “0.0” then weighing.

• Attention: When above two model of scales, like starting laying aside ground, demonstration 1.8kg/3.8lb, this value demonstration is the glass weight cannot weighing, after must let its automatic close-down, after light vibration starting, weighing or on the direct scale weighing (on automatic calls).

• Stand on the scale in balance and start to weigh, when the weigh is set, the figure will flash ad then you can read it.

• The figure will flashing for 10 seconds and the scale will switch off.

• Replace the battery if the screen display “LO”.

• Try again if the screen shows “Err”.

• Keep it dry and don’t touch water.

Attention:

• When unused, the scale should be left unloaded to avoid over assumption of power and failure of work.

• Try to stand in the middle place to avoid slip.

• Stand on the scale in good balance to avoid failure of lock and incorrect illustration.

• No heavy knock on the scale.

• Keep it away from water and don’t wash it with water.

• Battery have been set up.