Contact Platform Support
Help CenterHigh Precision GNSS Survey Antenna CORS Antenna GS282A
Related Products
-
High Accuracy Gnss Survey Antenna GS282AUS$ 199 - 389MOQ: 1 Unit -
HX-GS282A GNSS Survey AntennaUS$ 100 - 390MOQ: 1 Unit
-
GPS Survey Antenna Choke Ring Antenna HX-GS481AUS$ 200 - 400MOQ: 1 Unit
-
GS282 A GNSS Survey Antenna CORS AntennaUS$ 100 - 389MOQ: 1 Unit
-
GNSS Survey Antenna CORS Antenna GS282AUS$ 199 - 389MOQ: 1 Unit
The Application Range of Survey Antenna
Specifications of GS282A
Antenna Specification | Frequency Range: GPS L1, GLONASS L1, SBAS |
| Impedance: 50 Ohm | |
| Polarization: RHCP | |
| Axial Ratio: ≤ 3 dB | |
| Azimuth Coverage: 360° | |
| Output VSWR: ≤ 2.0 | |
| Gain at Zenith: ≥ 5.5 dBi | |
| Phase Center Error: ± 2 mm | |
LNA Specification | LNA Gain: 40 dB |
| Noise Figure: ≤ 2.0 dB | |
| Output VSWR: ≤ 2.0 | |
| Ripple: ± 2dB | |
| Drain Voltage: 3--18 VDC | |
| Current Consumption: ≤ 45 mA | |
| Group Delay: ≤ 5 ns | |
Mechanical Specification | Dimension: φ147 x 61.8 mm |
| Connector: TNC Female | |
| Weight: 400g | |
Environmental Specification | Operating Temperature: -40°C to +85°C |
| Storage Temperature: -55°C to +85°C | |
| Humidity: 95% Non-Condensing | |
GPS Antenna HX-GS282A | |
1. Using multi feed point design to ensure the superposition of phase center and geometrical center which
could minimize the influence of measurement error to lowest range
2. High gain of the antenna element and the direction map beam width to make sure the receiving satellites
performance of low elevation mask
3. Resistance multipath effects board inside could reduce the measurement error caused by multipath
4. Water proof, shock proof and lightning resistance
Survey antenna is the traditional RTK product standard antenna,can be widely used in land survey,marine
survey,channel survey,seismic monitoring,bridge survey,container opertion,etc.
Send Inquiry to This Supplier
You May Also Like
-
Endress+Hauser E+H Compact Conductivity Device Smartec CLD18-BGGENegotiableMOQ: 1 Piece
-
Laser Shaft Alignment Tool Heat Press Laser AlignmentNegotiableMOQ: 100 Pieces
-
ASTM D638 Plastic Tensile Tester Universal Tensile Testing Machine for Lab Use Universal Tensile Tester Load Cell OptionsUS$ 3000 - 10000MOQ: 1 Set
-
OMP60 Renishaw Probe A-4038-0001-21 A-4038-0002 Original and NewNegotiableMOQ: 1 Piece
-
Shaft Alignment Tool SKF TKSA 31 Laser Alignment Tool Shaft AlignmentNegotiableMOQ: 100 Pieces
-
SKF TKSA 31 Basic Wired Laser Shaft Alignment ToolNegotiableMOQ: 100 Pieces
-
High Quality Shaft Alignment Tool Tksa31 With Good Price, Laser Alignment, Tksa SeriesNegotiableMOQ: 100 Pieces
-
Shaft Alignment Tool TKSA 51 Large Sized Detectors and Powerful Lasers,quickly Check and Correct Shaft Alignments,very Easy to UseNegotiableMOQ: 100 Pieces
-
SKF TKSA 31 Laser Axis Intermediate Tool Easy-to-Use Touch Screen Quick Customization OEM Support Test Instruments ProductNegotiableMOQ: 100 Pieces
-
TKSA 51 Shaft Laser Aligner Alignment Tool High Quality With Good PriceNegotiableMOQ: 100 Pieces
