GPS Tracking Chip GNSS Receiver Board K501
Specifacations of K501
| DGPS GNSS Board K501 | |||
| Technical Specifications | Signal Tracking -GPS L1 C/A code, L1/L2 P code -BD-2 B1/B2 | ||
| Performance Specifications | Pseudo Range Accuracy -L1=10cm/L2=10cm -B1=10cm/B2=10cm | ||
| Carrier Phase Accuracy -L1=0.5mm/L2=1mm -B1=0.5mm/B2=0.5mm | |||
| Time Precision: 50ns | |||
| Standalone Positioning Accuracy: <1.5m | |||
| Static Accuracy -Horizontal: ±(2.5 +1×10-6×D)mm -Vertical: ±(5 + 1×10-6×D)mm | |||
| RTK Accuracy -Horizontal: ±(10+0.5×10-6×D)mm -Vertical: ±(20+0.5×10-6×D)mm | |||
| Timing Precision: -GPS 40ns -BD2 50ns -GPS+BD2 50ns | |||
| Measurement precision: 0.1m/s | |||
| Acceleration: 4g | |||
| Overload: 15g | |||
| RTK initialization -RTK initialization time: <10s -Reliability: > 99.9% | |||
| Signal Tracking: -Cold start: <50s -Warm start: <30s -Hot start: <15s -Signal recapture: <2s | |||
| Communications | 3 LV-TTL RS232 Ports -Baud rates up to 115,200 | ||
| Data Format: -NMEA-0183 Support (can customize) -Compass Binary self definition -CMR/CMR+ Support -RTCM2.3 Support -RTCM3.0 Support | |||
| Positioning data update rate -1 Hz, 5 Hz & 10 Hz (depends on installed option) | |||
| Raw data update rate -1 Hz, 5 Hz, 10 Hz & 20 Hz | |||
| Height: no limit | |||
| Speed: no limit | |||
| Physical Characteristics | Size: 46 mm x 71 mm x 13mm | ||
| I/O interface: 20-pin Double male header | |||
| Weight: 26g | |||
| Environmental Characteristics | Operating: -40°C to +85°C | ||
| Storage: -55°C to +95°C | |||
| Humidity: 95% no condensation | |||
| Electrical | Memory: 200MB | ||
| Input Voltage: +3.3V~+6V DC | |||
| Power consuming: 1.0 W | |||
| Radio Frequency Interface | Antenna interface: MCX | ||
| Output Power: +3.3~+6V DC | |||
| Output current: <100mA | |||
| OEM Board K501 (The World first and smallest size GPS+BeiDdou high accuracy RTK GNSS Module) 1.By using the GPS+BeiDou dual system high dynamic processing engine, the positioning accuracy could reach centi-meter 2.The hardware size, interface, data command is capable with other main board 3.K501 could be used on high accuracy land surveying (RTK or Handheld RTK), deformation monitoring system, machine control, integrated system, exploration, high precision agriculture, marine, ports, meteorological, defense, university and institute, high accuracy differential positioning and time service | |||
DGPS GNSS Board K501
Send Inquiry to This Supplier
You May Also Like
-
Endress+Hauser E+H Compact Conductivity Device Smartec CLD18-BGGENegotiableMOQ: 1 Piece
-
Computerized Electronic Table Type Universal Testing MachineUS$ 4500 - 10000MOQ: 1 Set
-
OMP60 Renishaw Probe A-4038-0001-21 A-4038-0002 Original and NewNegotiableMOQ: 1 Piece
-
Computer Controlled Electronic Fabric Tensile Strength Tester Tensile and Compression TestUS$ 4500 - 10000MOQ: 1 Set
-
Computerized Electronic Mechanical Universal Lab Testing Machine Tensile and Compression TestUS$ 4500 - 10000MOQ: 1 Set
-
20kn Computerized Electronic Table Type Universal Testing Machine Tensile and Compression TestUS$ 4500 - 10000MOQ: 1 Set
-
Technical Computer Controlled Electronic Universal Tensile Testing Machine Servo Motor Control Universal Bending Testing Machine 30knUS$ 4500 - 10000MOQ: 1 Set
-
High Quality Servo Motor Control Universal Bending Testing Machine Computer Controlled Electronic Fabric Tensile Strength Tester 30knUS$ 4500 - 10000MOQ: 1 Set
-
High Quality Computerized Fabric Tensile Strength Tester 30knUS$ 4500 - 10000MOQ: 1 Set
-
High Quality Computerized Electronic Mechanical Universal Lab Testing MachineUS$ 4500 - 10000MOQ: 1 Set
