competitive price JULY made in china hydropneumatic pump

Item number	JL-M  mini pneumatic driven liquid pump for hydro testing
Air driven inlet	G 3/8
Inlet	ZG 1/4
Outlet	M14*15
lubrication	Non-lubricated
Theory of operation	The Air liquid pump consist of a large  reciprocating air driven piston directly and coupled by a connecting rod to small area Air piston.The Air piston operates  in a high pressure air barrel section .Each barrel end contains high pressure inlet and outlet check valves
Maximum Flow rate	0.13 L/min
Installation	As you like

JL-M Series of air driven liquid pump is use a large area of low pressure gas to drive,thus get small area of the piston end of the high pressure liquid.Booster pressure ratio determines the maximum output pressure.When the booster is rapid reciprocating work,with the output pressure is close to the maximum load pressure value.

The booster working to slow down until stop,at this time, the pressure of the both piston end and liquidpressure achieve to balance,the piston keep stop and the energy consumption is minimum. When the output pressure decreases or increases the pressure ofthe driving gas,the booster will automatically restart, and work cycle to next balance.The pump head can be selected according to different media carbon steel or stainless steel.

Technical parameter of  air driven liquid pump

Advantage of our pump

1. Costing savings: An alternative to the purchase of High Pressure compressor ,our air driven liquid are

 Compact and Require no electrical or mechnical drive connections ,Are powered by the same air that they amplify 

 and can mounted in any position 

2. High Flow rates at High pressure: When High flow rates at high pressure are needed ,the Air Liquid pump

can charge a receiver to an even higher pressure level ,thus storing a volume of  air aviable for rapid release at a constant

pressure through a pressure reducing valve 

3.Safety Operation : Safe Pneumatic Operation-No Heat, Flame or Spark  Rish and No need electricity .

Usun Good quality Cheapest Miniature air driven liquid pump         

 It Can be used for pressure testing ,cylinder positiong for valves  ,super critical fluid extraction for food

preservation .Chemical metering /Injection ,hydrostatic testing for liquid pump .

		Packaging
	1	We adopt the advanced material Expansible Polystyrene(EPS) as inner packaging , which is more securer and eco-friendly than ordinary packing. Master cartons or wooden case packing in the outside.

We can also supply all kinds of packing ,according to customers' requirements: Shipping Marks, Bubble bags, etc.

Julyr industrial

Shipping

Julyr industrial

If there is any problem or question, please don't hesitate to contact us. 

(contact info , please click here. ←_← )

Our Advantages 

1. Various style for each products and completely series pneumatic products for you to choose from.
2. Large stock for fast shipping.
3. High quality with competitive price
4. Sample order & small quantity order is ok
5. Customize according to your special demand.
6. Provide free products information.
7. Reliable quality assured and active after-sell service

Feel free to contact us at anytime if you have any problems or questions on your purchase. We will resolve any problems such as damaged, not as described, missing parts, and lost items. All emails will be replied within 24 hours except Sunday and Chinese holidays. If you have any other requirements or questions, welcome to visit our website( Go our website,please click here. ←_← ), or just contact with us directly. Thank you!  

Julyr industrial

Cooperation Terms

• Sample terms: Sample fee is charged and will be refunded when order is placed.
• Sample time: 3-5 working days
• Payment terms: Full payment in advance 
• Delivery Time: 3-5 weeks after sample confirmation.

How do I place an order?

1. Feel free to contact us to get a quotation.

2. After we have agreed with the price and other terms, we will have to receive 30% deposit by T/T, Western Union or PayPal.

3. We will then make a few pre-production samples and send them to you for confirmation.

4. Once you have confirmed the sample(s), we will start mass production. It normally takes 3-5 weeks to complete.

5. After completion, we will receive the rest amount of the payment and arrange shipment.

Can I get a sample before placing an order?

Yes. We will charge a sample fee and custom make the sample(s) for you. Once you have placed an order, the amount can be fully refunded.

What is your shipping method?

We respect the client's choose, by sea, by air or by express.