manufacturer of cintinuous waste tyre pyrolysis plant and recycling machine to oil

Specifications

manufacturer of cintinuous waste tyre pyrolysis plant and recycling machine to oil
1 high oil yield
2 pollution free

2014New Technology Continuous Used Tyres Pyrolysis Device Recycling Machine

 

Introduction of Waste Tire Pyrolysis Recycling Machine
Reactor	1. Made by Q345 boiler plate. 2. Auto-welding both inside and outside 3. With rock wool insulation board
Auto-feeder	1. 50 ton hydraulic pressure 2. Can feed all types of materials 3. Save labor and save time
Catalyst chamber	1. Improve oil yield and oil quality 2. Reduce the speed of oil gas so that it can be better cooled
Oil-water separator	1. Separate oil and water 2. Collect heavy oil 3. Water sealing design keep safety
Condenser	1. The oil gas is cooled separately by small pipes inside condenser 2. Light oil is collected here
Vacuum device	Keep machine running under normal pressure
Anti-back fire device	1. Recycle residual gas to furnace as fuel 2. Water sealing design prevent tempering
Dust removal device	Dispose of flue gas caused by using coal, wood, oil or natural gas.

 

Feathers of Waste Tire Pyrolysis Recycling Machines:

1. You just need preheat at the first time when the machine start producing. And then the 

machine  can produce lasting for 20days without stop. Because it can use the waste gas to 

heat the chamber, no need other energy.

 

2. The most capacity can reach 30T/D, much bigger than other kind of plant. It is fully-automatic and fully –continuous.

3. New design of vertical condensers .you can get  high oil yield, good oil quality, high profit.

4. Low requirement on the raw materials, no need tiny granule, 10cm pieces acceptable for 

smooth running.

5. With CE.LVD.ISO.EMC Certificate

 

The Technical Parameter

 

NO.	ITEM	Technical Parameter
1	Suitable Raw Materials<=5cm	Small pieces of Waste tyre,rubber,waste plastic<=10cm
2	Operating Mode	Fully Continuous Opreation
3	Structure	Horizontal Type
4	Loading and discharging	Fully automatic feeding and discharging under high  temperature at the same time
5	Capacity(24h)	8-20Mt
6	Work Pressure	Slightly Negative Pressure
7	Oil Yield of tyres	40%-45%
8	Reactor Rotation Speed	1R/M
9	Power	50-60kw/h
10	Cooling Method	Cycle water
11	Type of Drive	Sprocket Wheel
12	Heating Method	Hot Air
13	NoisedB(A)	<=85
14	Main Reactor Weight(Mt)	15-18Mt
15	Total Weight(Mt)	30—40Mt
16	Installation Space Required	60m*30m
17	Manpower	2/shift
18	Shipment	1*40FR+3~4 HC
19	Delivery time	<=70Days

about our company

a> our company has two factories, one is in Qingdao city where u could see the working plants there; the other is in Shangqiu city where u could see how to make the pyrolysis and distillation equipments.

b> our engineer: Jianhua, zhou is our chief engineer. he has got 6 patents in the different devices of the pyrolysis equipment. he has been engaged in this plants for almost 20 years. and also he is the chief engineer in a South-Korea company.

Zhihua, Wang is another best engineer, he has been engaged in this equipment from 2003, he has been to many cities in China and many countries for installation. he is full of experience in installation.

Yuanzhi, Sha is another best engineer, he has been engaged in this plants for almost 25yeas. he has improved our technology and developed the equipments to make it more practical for our customer

 

about the clients around the world

Southeast Asia( for disposing plastic and used tires)

USA ( for disposing plastic and tires)

Italy ( for disposing plastic)

Brazil ( for disposing plastic)

Saudi ( for oil sludge)

China (for disposing mill paper, plastic, used tires, medical waste)

South-Korea( for disposing plastic)

Poland(for waste tyre)

Turkey(for scrap tyre)

Indonesia(for oil sludge)

Thailand(for waste tyre)

Philippine(for full tyres)

Iran(for waste tyres)

Malaysia(for waste tyres)

India ( for disposing used tires)