Contact Platform Support
Help Center
Related Products
-
New Type Design of Large Valid Volume Trade Assurance Wood Log Charcoal Carbonization FurnaceUS$ 1,500 - 66,000MOQ: 1 Set -
High Capacity Wood Sawdust Charcoal Carbonization FurnaceUS$ 5,000 - 10,000MOQ: 1 Set
-
Machinery Quite Environmental Wood Carbonizing FurnaceUS$ 1,500 - 6,600MOQ: 1 Set
-
Intelligent Salt Bath Hardening Furnace for Carbon SteelUS$ 1,500 - 6,600MOQ: 1 Set
-
Hot Selling Coconut Shell Carbonization Furnace Without Smoke (ISO 9001)US$ 1,500 - 66,000MOQ: 1 Set
No smoke activated rice husk charcoal carbonization furnace
wood logs, charcoal, sawdust briquette, lumber, bamboo, coconut shell, stick, cotton shell, rice hull and other wood sawdust, waste wood.
Introduction:
Our charcoal carbonization stove is ideal equipment for wood briquettes to have anoxic distillation carbonization. Adopting reasonable structure, the carbonization stove needs small quantity of heat consumption only. And the most important is that our carbonization stove is equipped with Superheated Stream cooling system, thus can speed up the cooling process, improve the quality of charcoal and shorten the production cycling time to 24-48 hours with the features of easy operation, higher safety, high efficiency and energy saving. The final products charcoal briquette bars can be used for heating furnace, industrial boilers, biomass power plant, barbecue and so on.
Main parameter:
1. Should first carbonization furnace placed farther away from the workshop and combustible places, because the carbonized during the smoke inside the stove through the cycle of change will bring about a great flame to avoid fire.Operation step:
2. The legislation to come out of semi-finished bar on the basket, the basket in bringing iron into the furnace, the roof closed is good, including all the tubes closed with mud the best.
3. Ignition. Make the wood into four furnace room, the use of fire lit. Probably about 20-30 minutes to observe the furnace room of the four furnace plate is automatically to fire. If you find that there is no Ignition can continue to put wood heating stove plate Ignition up until
4. After the furnace plate Ignition , there will be a great flame spray, because the furnace of semi-finished bar produced by smoke after a change in the combustion cycle, the resulting flame will be greater, do not use irrigated (to avoid danger), which is normal. Can also be above the stove pipe on top increasing the height of the three tubes, making the flames through the heightening of the tube inside the smoke, until the flame inside the furnace set up automatic flame failure.
Carbonization stove (gas flow type) is our newest developed products, and adopt advanced hot air carbonizing processing technology, which greatly increased carbonizing ratio (increased from about 88% to 99%) and shortened the carbonizing time (from 24 hours to 6 hours), and show the features of easy operation, higher safety, high efficiency, energy saving and environment protection.
This type of stove adopts the structure of unique air storage chamber, to fully reuse the smoke produced during the process of carbonization. And 60% of the redundant smoke can be used in drying and carbonizing, saving much fuel during the whole process, and increasing the enterprise revenue.
Product show:
Our service
1. Before Sale: help you to set a purchase plan according to your requirement
2. During Sale: accompany you to check the performance of the machine; train technical stuff for you
3. After Sale: Sent artisan to your place and help you with the installation
♦ Installation and Technical Service
To ensure the machine good working in customer site, it is suggested that customer send workers to accept the training about how to work with machine, how to solve frequently asked problems, how to replace spares etc. In this way can we ensure the good working and give warranty of 1 year for the machine. Or we can send you our technician to customer side to help customer set up the machine and train your workers.
Gongyi Lantian mechanical plant was founded in 1989s, which is a company specializing in the production of coal equipment, charcoal equipment, drying equipment, processing equipment, set research and development, production, sale, import and export trade as a whole.
We established of a set of complete service system and experienced service team after 30 years of exploration.Free for customers planning field, flow chart of design and installation, to provide the most professional technical training, and send technicians to guide the field installation and debugging of the equipment.So far, the company has won eight national patents, long-term exchanges and cooperation with overseas countries, won a wide range of international market.
Send Inquiry to This Supplier
You May Also Like
-
Good Price Biomass Wood Pellet Machine Rice Huck Pellet Making Machine Peanut Shell Pellet MachineUS$ 690 - 3880MOQ: 1 Set
-
16kVA Standby Power Diesel Generator PoweredNegotiableMOQ: 1 Set
-
Humic Acid Fertilizer Pellet Machine(CE)US$ 880 - 99,000MOQ: 1 Set
-
Pellet Briquetting Machine / Rice Husk Pellet Mill PriceUS$ 25,000 - 25,000MOQ: 1 Set
-
Wood Pellet Mill Machine for Wood Dust Pellet PressUS$ 1,000 - 10,000MOQ: 1 Set
-
Energy Saving Straw Coal Briquette MachineUS$ 2,000 - 3,000MOQ: 1 Set
-
Diesel Flat Die Small Pellet MillUS$ 500 - 1,000MOQ: 1 Set
-
Industrial Complete Flat Die Wood Pellet Production LineUS$ 20,000 - 25,000MOQ: 1 Set
-
Factory Directly Wood Pellet Press, Wood Pellet Press Machine, Gemco Supply Wood Pellet MillUS$ 3,000 - 4,000MOQ: 1 Set
-
Hot Sale and Best Quality Wood Briquette Machine Screw PressNegotiableMOQ: 1 Set
