Contact Platform Support
Help CenterCEP-2 Heat Shrinkable Sleeve for Directional-drilled Crossings
Related Products
-
Heat Shrinkable Reducer Sleeve/CEP-3 Water-proof CapUS$ 2 - 100MOQ: 100 Meters -
Heat Shrinkable Wrap-around SleeveUS$ 2 - 100MOQ: 100 Meters
-
Heat Shrinkable Tubular Sleeve for Pipe Joint Corrosion ProtectionUS$ 2 - 100MOQ: 100 Meters
-
Si-Fe Tube Anode for Impressed Current Cathodic ProtectionUS$ 1 - 1,000MOQ: 1 Piece
-
Graphite Anodes/Auxiliary Anodes for ICCPUS$ 10 - 100MOQ: 10 Pieces
Specifications
The CEP-2 Heat Shrinkable Sleeve for Directional-drilled, CEP-2T is Heat Shrinkable Tape.CEP-2 Heat Shrinkable Sleeve for
Directional-drilled Crossings
1.Composing of CEP-2 Heat Shrinkable Sleeve for Directional-drilled Crossings.
The CEP-2 Heat Shrinkable Sleeve for Directional-drilled be constituted by Central Heat Shrinkable Sleeve/tape and Heat Shrinkable Sleeve/tape be strengthened that width is 150-200mm with the liquid epoxy primer.CEP-2T is Heat Shrinkable Tape.
2. Product description
When joint Heat Shrinkable Sleeve /Tape installation completed, the 50% width of Heat Shrinkable Sleeve/Tape strengthened that width is150-200mm, lap on the joint heat shrinkable sleeve /Tape , the other 50% on the pipe coating . It often used at front end of joint Heat Shrinkable Sleeve/Tape along its Directional-drilled Crossings. The Heat Shrinkable Sleeve (Tape) with the liquid epoxy primer is applied on the pipe joint which has three-layers.
3. Specification
3.1 Thickness of CEP-2Heat Shrinkable Sleeve
3.1.1 Specification of CEP-2T directional drilled heat shrinkable sleeve
Product |
Type |
Specification(mm) |
|||
DN. |
Width |
Backing Thickness |
Adhensive Thickness |
||
Directional Drilled Corssing Heat Srhinkable Sleeve |
CEP-2T |
as customer's requirement |
450、500 |
≥1.5 |
≥1.2 |
The production sleeve(sacrifice sleeve)can be supplied as the customers' requirements:
width:150mm-200mm
3.1.2 Thickness of the closure patch
Product |
Width（mm） |
Thickness（mm） |
Length（mm） |
Closure Patch ofCEP-2T |
70、100、120、150 |
≥1 |
as same as sleeve axial length before shrinking |
Send Inquiry to This Supplier
You May Also Like
-
MM20S Virgin PP Raw Material From Sinopec General Purpose Injection Molding GradeNegotiableMOQ: 1 Kilogram
-
Original SABIC VALOX™ 357U Resin Opaque Impact Modified UV Stable FR PC/PBT Engineering PlasticNegotiableMOQ: 25 Kilograms
-
Polymer & ResinNegotiableMOQ: 2400 Tons
-
Fluorocarbon Powder Coating & Epoxy Flake Floor Coating - Chemical Resistant SolutionsNegotiableMOQ: 500 Kilograms
-
Economic Interlocking Horse and Cow Stable Mat Made of Rubber or EVAUS$ 13.5 - 35.4MOQ: 100 Pieces
-
SAP Super Absorbent Polymer for Sanitary Napkins or DiapersUS$ 1.5 - 2MOQ: 1000 Kilograms
-
Slip Additive Masterbatch With PE CarrierUS$ 2.3 - 2.5MOQ: 500 Kilograms
-
UHMW PE Powder for Lead-acid Battery SeparatorUS$ 2,750 - 2,850MOQ: 1 Ton
-
Pet Flakes Hot Wash / Pet Flakes Chip / Hot Washed Pet FlakesUS$ 650 - 680MOQ: 22 Tons
-
PP/ HDPE/ LLDPE VIRGIN & RECYCLED, PE, PPCNegotiableMOQ: 25 Metric Tons
