Contact Platform Support
Help CenterHeat Shrinkable Reducer Sleeve/CEP-3 Water-proof Cap
Related Products
-
Heat Shrinkable Wrap-around SleeveUS$ 2 - 100MOQ: 100 Meters -
Heat Shrinkable Tubular Sleeve for Pipe Joint Corrosion ProtectionUS$ 2 - 100MOQ: 100 Meters
-
Si-Fe Tube Anode for Impressed Current Cathodic ProtectionUS$ 1 - 1,000MOQ: 1 Piece
-
Graphite Anodes/Auxiliary Anodes for ICCPUS$ 10 - 100MOQ: 10 Pieces
-
Graphite Anodes/Auxiliary Anodes for ICCPUS$ 10 - 100MOQ: 10 Pieces
Specifications
CEP-3 Water-proof Cap are sued to protect the insulating foam between the pipe and the outer jacket in insulated pipe sections.CEP-3 Water-proof Cap
CEP-3 Water-proof Cap are sued to protect the insulating foam between the pipe and the outer jacket in insulated pipe sections. Water-proof Cap should be sued on both pipe ends.
1.CEP-3 Water-proof Cap Specification
| No. | Type & Specification | Pipe Diameter (mm) / Thickness of Insulated Jacket (mm) |
| 1 | CEP-3 60d | 60/d |
| 2 | CEP-3 89d | 89/d |
| 3 | CEP-3 114d | 114/d |
| 4 | CEP-3 159d | 159/d |
| 5 | CEP-3 219d | 219/d |
| 6 | CEP-3 273d | 273/d |
| 7 | CEP-3 325d | 325/d |
Notes:
1). The d is thickness of insulated jacket, it is specified by the customer's order. Normal size is 30-45mm.
2). Besides the above specification, specific requirement of customers can conformed.
2. Outer(Inner) Heat Shrinkable Sleeve (Tape) of insulated Jacket
CEP-1 Heat Shrinkable Sleeve&CEP-4 Heat Shrinkable Tape for Insulated Jacket
| Product Name | Pipe diameter (mm) | Specification | |
| Outer Sleeve(Tape) | Inner Tape | ||
| Heat Shrinkable Sleeve (Tape) | 60 | CEP-1(4) 60×300 | CEP-4 (60+2d)×500 |
| Heat Shrinkable Sleeve (Tape) | 89 | CEP-1(4) 89×300 | CEP-4 (89+2d)×500 |
| Heat Shrinkable Sleeve (Tape) | 114 | CEP-1(4) 114×300 | CEP-4 (114+2d)×500 |
| Heat Shrinkable Sleeve (Tape) | 159 | CEP-1(4) 159×300 | CEP-4 (159+2d)×500 |
| Heat Shrinkable Sleeve (Tape) | 219 | CEP-1(4) 219×300 | CEP-4 (219+2d)×500 |
| Heat Shrinkable Sleeve (Tape) | 273 | CEP-1(4) 273×300 | CEP-4 (273+2d)×500 |
| Heat Shrinkable Sleeve (Tape) | 325 | CEP-1(4) 325×300 | CEP-4 (325+2d)×500 |
Notes:
1).The d is thickness of insulated jacket, it is specified by the customer's order. Normal size is 30-45mm.
2).The length of outer (inner) Heat Shrinkable Sleeve/Tape is decided by the end length of bare metal part
of jacket pipe. The above data is normal size.
3).Besides the above specification, specific requirement can be conformed.
Send Inquiry to This Supplier
You May Also Like
-
MM20S Virgin PP Raw Material From Sinopec General Purpose Injection Molding GradeNegotiableMOQ: 1 Kilogram
-
 High-Flow Composite Material-Designed for Efficient Thermal Management in Electronic and Electrical System T65XFUS$ 2.9 - 3.3MOQ: 25 Kilograms
-
Polymer & ResinNegotiableMOQ: 2400 Tons
-
Fluorocarbon Powder Coating & Epoxy Flake Floor Coating - Chemical Resistant SolutionsNegotiableMOQ: 500 Kilograms
-
Economic Interlocking Horse and Cow Stable Mat Made of Rubber or EVAUS$ 13.5 - 35.4MOQ: 100 Pieces
-
SAP Super Absorbent Polymer for Sanitary Napkins or DiapersUS$ 1.5 - 2MOQ: 1000 Kilograms
-
Slip Additive Masterbatch With PE CarrierUS$ 2.3 - 2.5MOQ: 500 Kilograms
-
UHMW PE Powder for Lead-acid Battery SeparatorUS$ 2,750 - 2,850MOQ: 1 Ton
-
Pet Flakes Hot Wash / Pet Flakes Chip / Hot Washed Pet FlakesUS$ 650 - 680MOQ: 22 Tons
-
PP/ HDPE/ LLDPE VIRGIN & RECYCLED, PE, PPCNegotiableMOQ: 25 Metric Tons
