Top Consumable Products Cored Welding Wire Aws 5.20 E71t-1 Flux Cored Wire

Introduction: 

It is a kind of titania type CO2 gas-shielded flux-cored welding wire. It has excellent welding performance, soft and stable arc, fewer spatters, good slag detachability and beautiful appearance of weld. Suitable for downhand welding and horizontal welding. All-position welding. It has high welding efficiency. The weld metal has been given toughening treatment by microelements, so it has excellent low temperature toughness above -40℃ and good crack-resistance.

Uses:

Used for welding structures made of low temperature steel and low-alloy structural steel. Widely used for welding some key structures like shipbuilding, mechanical manufacture, pressure vessels, storage tanks, petroleum machinery, chemical machinery, ocean structures, etc.

Chemical composition (%)

Mechanical Properties of weld Metal

FLUX CORED WIRE 

1.Precision layer wound on plastic spool, each spool in a box, then boxes on wooden pallets.

1kg D100mm plastic spool ,then 1000spools per pallet

5kgs D200mm plastic spool; then 200spools per pallet

(5kg/ carton, 200cartons/ pallet, total 1000kgs/ pallet, 20-24pallets/ 1×20′ FCL)

15kgs/ 18kgs/ 20kgs D270mm plastic spool.(15kg/ carton, 72 cartons / pallet, total 1080kgs/ pallet, 20-23pallets/ 1×20′ FCL)

15kgs/ 18kgs/ 20kgs K300mm metal spool.

2. 250kg drum, 4 drums in one pallet;

   350kg drum, 2 drums in one pallet

3. Or according to your specific requirement. 

FLUX CORED WIRE

Samples:

Supply you one spool 3-5kg wire free of charge to test the quality , Postage will be on the customer’s charge. But postage could be deducted from the first order.

Inspection:

Full-Inspection before delivery. Third party inspection: BV SGS CCIC COC CIQ all accepted .

Information Needed to Get a Quotation:

Model, Diameter, Packing and Quantity, such as Welding Wire E71T-1 1.2mm 15kgs/D270 plastic spool, 21.6 tons

How to place order?

  Flux cored wire manufacturing process

Flux cored wire

Q: How does your factory do regarding quality control?

A:  We have strict control in testing of raw material, production process and final process. Only qualified products can be sent out.And we have passed ISO,CE,NK,BV,GL,LR,ABS,TUV,DB certificates.

Q: How many days it will take you to produce mass production for us?

A: Usually it takes about 7 to 15 days, it also depends on the quantity and production seasons.

Q: Where is your factory located? Can I visit there?

A: Our factory is located in Tianjin City, China, near to Beijing. You are warmly welcomed to visit us!

Q: Are samples available?

A: We are happy to provide free samples to you after you accept our quotation and really want to cooperate with us.

Q: Is OEM available?

A: Yes, because we usually do it like that.