Contact Platform Support
Help CenterConverter Sound Frequency Slag System
Related Products
-
Three Strands Continuous Casting Non-contact Automatic Length Cutting SystemNegotiableMOQ: 1 Piece -
Billet Printing Machine for Metal PartsNegotiableMOQ: 1 Set
-
Square, Round, Rectangular Billet Marking MachineNegotiableMOQ: 1 Set
-
Continuous Casting Non-contact Automatic Length Cutting SystemNegotiableMOQ: 1 Set
-
Five Strands Continuous Casting Non-contact Automatic Length Cutting SystemNegotiableMOQ: 1 Set
Specifications
1.Timely control of drying2.Timely control splash
3.Relative model identification
System overview
The frothy in the converter steel making furnace slag will affect the smelting processing directly And sputter will be produced by too much froth, which will lead to the difficulty to operate and also the iron loss increase; on the other hand, if the froth is too little, it will get dry quickly, which is not good for desulphurization. Using the converter sound melt slag system could detect how the sound is changing and what the characteristics are. And this function could make us take actions to avoid the occurrence of dry and sputter.
Equipment type: ZYT-HZ-100
System principle
The detection of slag layer thickness can be treated as the process of slag test. The sounds collected by the converter have five sources. These sources of noise power and intensity are listed in the table as below:
Sound Source |
P (w) |
Lp (dB) |
The total power and noise of Supersonic stream |
8.12×10-2 |
149 |
The sound of oxygen stream the impact of pool |
5×10-2 |
107 |
The sound of CO bubbles in the pool churn and promote the pool |
7×10-3 |
95 |
The sound of exhaust escaping |
5×10-9 |
41 |
Plant noise |
6×10-3 |
93 |
The system highlights the sounds of oxygen flow and the sounds impacted on the melten pool , and the thickness of the slag layer could be measured by those sounds, starting from selection of sound frequency ,we can estimate the oxygen flow level of the noise according to the total sounds .
The main technology of the system
Sputter and early warning line identification
Best of the slag zone model identification
Relative model identification
Splash alarm adaptive Model
Send Inquiry to This Supplier
You May Also Like
-
40T Electric Tilting Machine for Heavy Parts RotationNegotiableMOQ: 1 Set
-
Multifunctional Twin-cylinder Baling Press for Aluminum CansUS$ 12500MOQ: 1 Unit
-
Automatic Semi Automatic Manual Fluidized Bed Dip Powder Coating Equipment Customizable for Refrigerator ShelvesUS$ 2000 - 40000MOQ: 1 Set
-
Replaceable Knives Wood Chipper Moveable Type Chips Ready for Compost or BoilersNegotiableMOQ: 1 Set
-
Metal Zipper Chemical Cold Plating Machine (13 Tanks)US$ 1,000 - 10,000MOQ: 1 Set
-
Made In China JOY 1330/1325 Portable Air Plasma Cutting MachineUS$ 2,000 - 6,900MOQ: 1 Set
-
Automatic Infrared Length Cutting SystemNegotiableMOQ: 1 Set
-
Factory Supply Stainless Steel Sheet Polishing MachinesUS$ 2,000 - 5,000MOQ: 1 Set
-
Cheap Copper Wire Scrap 99.99 Recycling MachineUS$ 13,000 - 16,999MOQ: 1 Set
-
High Output Recycling Copper Wire Machine/Wire Recycling Machine/Copper Wire Recycling MachineUS$ 2,000 - 15,000MOQ: 1 Set
