Home > Products > New Products > robot oxy-hydrogen cutting machine
robot oxy-hydrogen cutting machine
- 500 Set / Sets per Month
- guangzhou shanghai
- T/T L/C D/P D/A Credit Card PayPal
Product Description
Working Principle :
Electricity flows to the Adjustable Transformer Controller ; the alternating current then goes into the Commutator , and transforms into direct current. The direct current connects to the anode "+", and cathode "-" in the electrolytic cell , to electrolyze water into pure hydrogen and oxygen. As the Oxyhydrogen gas passes through the filter and pressure detector, the flame device (with anti-backfire safety valve) ignites to a temperature between 800 and 3000 degrees centigrade. It can be used for precision cutting processing equipment, giving results that are economical, reliable, safe, and environmental.
Oxyhydrogen Cuts up to 600 mm Steel. Extremely clean cut, cheaper, faster & less oxidation.
Generally, the gas cutting of iron(steel) uses heat of reaction of oxygen and iron.
It melts by preheating gases and blows away by oxygen. So we also call it oxygen cutting.
In the past, we had to make preheating flame by mixing oxygen with propane or acetylene.
However, we can heat the parent metal more than 800°C with preheating flame that is made by Brown Gas only.
Then oxydize the iron by high pressure oxygen from the center of a tip.
So the difference of melting point between the parental metal and oxydized iron can make the cut.
In this case, Brown Gas has a property to go straight and it makes less heat deflection and less oxydized iron which saves the loss of iron or parent metal.
Brown's gas cuts thick iron fast, smooth and clean. Further, when we miss our cut from traveling too fast, we are able to pick up the cut right where we left off;
(the oxidation layer is absolutely no problem for this torch). In fact, Brown's Gas will heat iron oxide faster than it will heat iron.
We've also noted that iron that has been surface treated with a Brown's Gas flame is much more resistant to rust.
There are some additional side benefits. For some reason, thick scale or rust on iron will not spit and pop as you cut it, like it does with nearly any other torch.
And when cutting bolts out of concrete it does it smooth
Features:
Ecology and environmental :
The gas generated by our machines can be completely burned without smoke and carbon monoxide. Therefore, pollution, toxins and public nuisance won't be generated.
High standards of safety :
Consistent torch - the energy is available as soon as you turn on the machine.
Multiple safety devices are built-in.
When insufficient water or coolant is present, or when overheated, the machine will cut off automatically, thus ensuring the safety of equipment and users alike.
Economy and practicality:
Requires only easily accessible soft water and a small amount of electric power.
The fuel produced can be widely applied, replacing traditional dangerous gases (including LPG and acetylene) currently used.
Most existing equipment can be used with our generators.
High Mobility:
The machine size is appropriate for its job, and many of our Oxyhydrogen generators come installed with wheels to facilitate mobility.
Each can immediately generate fuel after a minimum set-up, and be used for long periods.
NO Heat Waste:
Eliminates heat waste and radiation. Maintaining a consistent working environment, thus preventing operator fatigue due to radiant heat.
This can reduce operating costs and accidents.
Cost Comparison of Oxy-hydrogen gas VS. Acetylene (1m Long steel Plate Cutting)*
Steel Thickness | Acetylene | Epoch Oxy-hydrogen Generator | Efficiency | |||||
Consumption | Cost | Time Min.'Sec." | Electricity | Coolant | Cost($NT) | Time Min.'Sec." | ||
6mm | 4 | 1.2373 | 2'00" | 0.09 | 35 | 0.892 | 1'52" | 8 seconds faster |
12mm | 9 | 3.253 | 2'20" | 0.155 | 38 | 1.158 | 2'16" | 4 seconds faster |
20mm | 9 | 4.0643 | 2'55" | 0.158 | 38 | 1.167 | 2'30" | 25 seconds faster |
50mm | 13 | 7.88 | 3'55" | 0.221 | 55 | 1.664 | 3'38" | 17 seconds faster |
Factory exhibition:
CERTIFICAION WE HAVE ACIEVED:
Contact Us
- Changsha Kingkar Eco-Technologies Co., Ltd.
- Contact nameJenny Hu
- Phone86-731-89870168
- AddressFactory Add.: Rd.25, Qingshan Industrial Park, Yuelu District, Changsha, Hunan, China. Office Add.: 23 Floor, Shanghe International Business Cent Changsha,Hunan
New Products |
- Jowuey 1390 CO2 laser cutting machine for cutting acrylic wood mdf acrylic laser cutting machine
- Factory hotsale 150W wood laser engraving machine CO2 1325 acrylic laser cutting machine High-Quality with ruida system
- Hot Sell 1325 Laser Cutting Engraving Machine laser cutter engraver with Ruida control System for leather wood acrylic
- JOWUEY 1390F CO2 water cooling high quality RUIDA controller 80W~200W laser cutting and engraving machines
- 45° Bevel Tube Laser Cutting Machine
- Semi-enclosed Sheet Metal Fiber Laser Cutting Machine with Exchange Platform
- Ultra High Power Fiber Laser Cutting Machine 1500W-50000W
- 1000W - 6000W Fiber Laser Tube Cutting Machine
- Zero Tailing 3 Chuck Fiber Laser Tube Cutting Machine
- Handheld Laser Welding Machine 1500W
- High Power Raycus Fiber 1000w Laser Source Generator 3000W Fiber Laser Source For Metal Cutting Machine Accessories
- Jowuey 1390 CO2 laser cutting machine acrylic laser cutting machine with up and down table
- Water chiller for tube laser cutting machine 2024
- Automatic tube laser cutting machine 2024 3000w
- Laser tube cutting machine with tube feeder 5 axis
- Fiber laser tube cutting machine for sale 1500W
- REBOUND CNC 3axis fiber laser pipe cutting machine for jewelry 12000w
- Metal sheet tube laser cutting machines manufacture 3000w
- Fiber laser sheet metal and tube cutting machine
- Fiber laser tube cut iron pipe cutting machine
- Tube and pipe laser cutting machine 5 axis
- Small metal laser tube cutting machine for sale
- 5 axis sheet-metal-fiber-laser-cutting-machine 1500watt
- 4060 fiber laser cutting machine stainless steel for best price
Popular Searches
Recommended Products
- TDK SMD Magnetic Bead MMZ1005A601E FERR BEAD 600OHM 25% 300MA 0402 M1005 SMD
- TDA8020HL/C2 NXP PKG QFP-32 instead TDA8020HL2BD-T CIRCUITO INTEGRADO SMART CARD INTERFACE 32LQFP LF
- SUP resistor 0402 1R 1% instead RM04FR00CT RES 1R 0402 1% CAL CHIP
- SUNLORD inductor 10UH 20% 7.8A 10 x 11.5 x 4MM instead IHLP4040DZER100M01 FIXO 10UH 6.8A 36.5 MOHM
- SRR1240-680M INDUTOR POWER 68UH 1.5A SMD BOURNS
- SN74LVC1G66DBVR SWITCH ANALOGICO 01 CIRCUITO SPST-NO 10 OHM TEXAS INSTRUMENTS package SOT-23-5
- SMD passive crystal oscillator 5032 24MHZ 10PPM 20PF YXC PKG SMD-4 instead ESC INC ECS-240-20-30B-TR
- SMD active crystal oscillator 7050 50MHZ 1.8-3.3V 30PPM SJK PKG SMD-4 instead CB3LV-3C-50M0000 OSC SMD CRISTAL OSCIL 50PF C 7.7, L 5.2, A 1.8MM
- SMAJ58A JINGDAO SMA instead SMAJ58A-TR TRANSIL SGL UNUDIR 58V DO-214AC ST MICROELETRONICS
- SD560B SMCDIODE PKG SMB SD560BTR DIODO 5A 600V SMB
- Samsung capacitor 1206 10UF 10% 50V X5R CL31A106KBHNNE
- Samsung 0805 22UF 20% 6.3V X5R capacitor instead C2012X5R0J226M CER. 22UF 6.3V 20% X5R 0805 LF TDK CORPORATION
Find Similar Products By Category
- Machinery > Industry Laser Equipment > Laser Cutting Machines
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Jenny Hu
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-