Coarse coal slime recovery machine for coal preparation plant

wooden case or standard container

Environmental Protection Fine Sand Washing and Recycling Machine

The Hydrocyclone Unit, mod. GRF, has been mainly realized for the recovery of fine and very fine material contained in the waste water from traditional crushing, screening and washing plants, solving various existing problems such as:

- Recovery of approximately 90% of sands even the very fine ones (up to about 74 microns), which would otherwise be lost, while sometimes they are essential.

- Nearly complete elimination of all impurities (i.e. clay and silt).

- Moisture content of the recovered sand is less than 15%.

- Substantial reduction of the solids in the waste water, which would otherwise overload the water treatment plant.
The Hydrocyclone Unit is mainly made up of: horizontal centrifugal pump driven by an electric motor complete with pulleys and V- belts, Hydrocyclone with wear resistant rubber coating, dewatering screen operated electromechanically with counter-rotating weights, vibrating deck interchangeable polyurethane inserts. The supporting structure in profiles and electro-welded press-folded steel plates, complete with inspection platforms, handrails and access ladder for normal control and maintenance operations

The status of artificial sand washing At present, most of the existing artificial sand production lines are utilizing wet production process. No matter what the type of sand washing machine is, the biggest drawback is that the fine sand( particle diameter is between 0.045mm and 1.6mm )will be in a serious loss and sometimes the loss will be over 20%. This drawback will not only reduce the output, but also affect sand gradation. For this reason, the gradation is not reasonable and fineness modulus is larger so that the product quality of mechanism sand will be largely reduced. Silty sand recovery system process program and main technical specifications Fine sand recovery system process program is used for solving the problems mentioned above. Our Zenith Machinery developed YH series of fine sand recovery system, which is also called mud purification equipment. Our YUHONG Machinery developed this system by combining foreign advanced technology with actual conditions of our country. This system is fine material recycling device with the world's advanced level. It is widely used in sand aggregate processing system in hydropower station, glass raw materials processing system, artificial sand production line, thick coal slime recovery in coal dressing plant and environmental protection engineering(mud treatment), etc. The YHseries of fine sand recovery system can effectively solve the problems in fine sand recovery.

Working principle of fine sand recovery system

1.Fine sand recovery system structure: consists of electrical machine, slurry pump, swirler, ZKR line vibrating screen, purge tank and material returning bin, etc.

2.Working process of fine sand recovery system: the sand and water mixture is sent to swirler. After centrifugal grading enrichment, the fine sand is sent to vibrating screen by sand sinking mouth. After dehydration by vibrating screen, the fine sand is efficient ly separated from water and a few of fine sand and clay come through material returning bin then come back to purge tank. When liquid surface in the purge tank is high, the discharge hole can adjust the liquid surface. The weight concentration of recycling materials in line vibrating screen is 70%-85%. Adjusting fineness modulus can be realized by changing pump rotation speed, changing pulp consistency, adjusting overflow water and changing sand sinking mouth. By the process above, the fine sand recovery system can finish three functions, cleaning, dehydration and grading.

Characteristics and advantages of fine sand recovery system

1,In the traditional artificial sand wet processing technology, washing and dehydration of artificial sand are finished by spiral sand washing machine. Loss of artificial sand (especially fine sand) almost can't be controlled. Using fine sand recovery device can eEffectively reduce the loss of the fine sand and the loss will be controlled in 0.5%. The fine sand recovery system solves the problems in artificial aggregate processing system that fineness modulus of finished product sand is high and content of rock flour is low.

2.Vibrating screen uses polyurethane screen cloth, which has longer life than other screen cloth and is not easily to be blocked.

3.Polyurethane is in the inside of swirler so that the service life of whole device is increased and the device can finish the work successfully, such as pulp concentration and liquid clarification.

4.Fine sand recovery system can recycle 95% of fine particle materials in emissions and features with incomparable technology and economic advantages.

 5.The fine grains are fully recycled. Work of settling pond is reduced and disposal costs of settling pond is also decreased.

 6. Fine sand recovery system reduces natural stacking time of fine materials so that the productions can be transported directly and supplied to market.

7.According to the different requirements of users, fine sand recovery system can design corresponding solutions. Using after river sand dredging machine

Technical datas:

Note : this parameter just for reference , we also have other models machines , if you are interested in our equipments , please don't hesitate to contact me .

This is our product: