Rfid Reader

Specifications

This is a new breed of smart reader with superb performance. No matter what type of tag, FDX/HDX, glass or normal tags, it works to get the best possible performance from all tags at all times. It features very long read range and is intended for logistics and cattle tagging. Read ranges in the order of 110 thru 140 cm are possible with our 600x800mm Antenna.

—Very Long Read Range with FDX Tags —Very Long Read Range with HDX Tags —Multiple Readers Allowed —DSP - Digital Signal Processing —Continuous or single Read —Antenna Safety Lockout —Decimal or Hexadecimal Output —Readers Encapsulated in Rugged Die-Cast Enclosures —Low Power —Auto Tuning —Vendor Antenna tune Facility —Water and UV Resistant Enclosure

The series readers are dual readers that read HDX B (AMPSK, ISO11784) and FDX (BI-Phase ISO11785) tag simultaneously. The series readers employ DSP techniques that dramatically reduce interference, noise and vibration effects making the reader suitable for hostile noisy environments. Excellent read range can be achieved with both glass and conventional open coil format tags partly because the reader can instantly change its internal algorithms to adjust to differences in individual tag parameters. It has a synchronization feature that allows multiple readers to be used in close proximity

The  series readers are equipped with a sophisticated auto-tune facility that compensates for Antenna drift

    due temperature changes. The readers perform an auto-tune shortly after power up. (allows the host computer to command an auto tune at any time down the RS232. See the command schedule)

—Max Input DC Voltage 18volts —Minimum Input DC Voltage -18volts —Max Input current 1.2 amperes —Max Antenna Voltage 400Volt PKP across both terminals. —Max Case Temperature 80deg C —Min Case Temperature -30deg C —Max Sync Voltage 6V —Min Sync Voltage -0.5V —Max Beeper Voltage 15V —Max Current on beeper wire 30mA