Oil Filter
Specifications
1.Shell with aluminum alloy,2 Light weight,
3.Compact structure,
1, Properties and Uses
For oil-absorbing filter, filter the working fluid in solid particles and colloidal substances, effective control of pollution caused by the working fluid.
Installed on the tank top, bottom or side, and the oil-absorbing mouth must be installed below the liquid level in the tank.
Equipped with a self check valve, filter replacement, the fuel tank inside the working fluid does not drain, but also needed a vacuum table assembly and vacuum switching devices such as the sender.
Cartridge filter material were used composite fiber kapok shaping filter paper, stainless steel braid.
Shell with aluminum alloy, light weight, compact structure, beautiful shape.
2, technical parameters
Working medium: mineral oil, emulsion, water - glycol, phosphate ester hydraulic fluid (kapok shape filter paper only applies to mineral oil)
Operating temperature: -25tem.~ 110 tem
Vacuum pressure switch sender: 0.03MPa
Send Inquiry to This Supplier
You May Also Like
-
FFU( Fan Filter Unit & Purifying Equipment )NegotiableMOQ: 1
-
Seawater Desalination SystemUS$ 2000 - 1000000MOQ: 1 Set
-
Swivel Fittings Thread Protective Caps Hydraulic Line Hose Ro Membrane End CapsUS$ 0.05 - 0.11MOQ: 1 Piece
-
Industrial Water Filtering MachineNegotiableMOQ: 1 Set
-
High Efficient Industrial Water Sand FilterUS$ 1,000 - 3,000MOQ: 2 Sets
-
Original New HFCN-8400+ HFCN-8400 High Pass FilterUS$ 1 - 2MOQ: 10 Pieces
-
Ultraviolet Water SterilizerNegotiableMOQ: 1000 Sets
-
High Strength Aluminum Water Alumina Filtering BlockNegotiableMOQ: 5000 Pieces
-
6 Stages UV Lamp RO Water FilterNegotiableMOQ: 200 Sets
-
Rotary Vibrating Screen for Paper PulpUS$ 400 - 10,000MOQ: 1 Set