Contact Platform Support
Help CenterFrp L Angle Profile/ Glass Fiber Reinforced Plastic/frp Profile
Related Products
-
Made in China Corrosion Resistant Fiberglass Steel Angles , Fiberglass Angle Iron,fiberglass Angle BarUS$ 2.6 - 2.8MOQ: 100 Meters -
Corrosion Resistant Fiberglass Steel Angles , Frp Angle Bar,frp Angle IronUS$ 2.6 - 3MOQ: 100 Meters
-
FRP Pultrusion Angle Steel/the Glass Fiber Material/frp Steel AnglesUS$ 28 - 30MOQ: 100 Meters
-
Corrosion Resistant Fiberglass Angle Iron,fiberglass Steel Angles,frp Angle BarUS$ 2.5 - 3MOQ: 100 Meters
-
High Strength FRP Angle Iron,fiberglass Angle Iron, Fiberglass Angle SteelUS$ 2 - 5MOQ: 100 Meters
frp L angle profile/ glass fiber reinforced plastic/frp profile
Advantages
1.Safer Surface
Traction and safety are enhanced by course epoxy coating bonded to walking surfaces.
2.Better Support & Stability
Heavier loads are supported and stabilized because center core wedge and spacer bars provide a mechanical lock at each bearing bar.
3.Unidirectional Strength
Cross rods and bearing bars lock mechanically for maximum strength.
4.Easy Fabrication
Standard hand tools are used to cut and fabricate.
5.Low Maintenance
Angled design offers easier cleaning, as dirt, cleaning fluids and rainwater simply wash away.
6.Extended Life
Protective coated resin surface increases resistance to chemical corrosion and continuous ultraviolet exposure.
7.Durability
Continuous polymer fibers increase transverse strength and resistance to impact.
8.Stress Resistance
Continuous polymer rovings resist tension, compression and bending while providing longitudinal strength.
Pultrusion technique
During the pultrusion process, the raw material are pulled through a heated steel forming die using a continuous pulling device. when the reinforcements are saturated with the resin mixture in the resin bath and the wetted reinforcement package is wrapped in a surfacing veil. the completed package then goes into premolding stage that roughly forms the package into the appropriate shape to enter the heated trimming die for curing. the trimming die is the exact shape of the final part desired. upon exiting the trimming die, the part is over 90% processing and solid. Cutting in accordance with requirements of the length, the entire process is completed.
Company was founded in 1993, its predecessor is a joint venture company, through optimization and enterprise restructuring become Qingyun Maoshengyuan Composite Material Co. We have over 20 year' experience of producing frp farm equipment. We own well-equipped testing equipment and strong technical force. With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in farms and others. Our company has been grown into one of the best manufacturers in the production of FRP pultrusion structural sections. Beyond domestic market.
1. Do you provide OEM service?
Yes, we do. Please send us your design draft to us, we will arrange molding.
2. How is the payment?
Telegraphic Transfer (T/T) or L/C.
3. How long is the delivery time?
According to the quantity of goods,it would be 10 to 30 days
4. How is the packing?
We usually use carton or according to customer's requirement.
5. Do you have warranty about the FRP products?
The FRP grating has ten years guarantee. We will free replacement If it breaks down.
Send Inquiry to This Supplier
You May Also Like
-
Building Profiles Pultruded Profiles Cable TrayUS$ 0.5 - 5MOQ: 1000 Meters
-
Beautiful Fiberglass FenceUS$ 20 - 30MOQ: 2 Pieces
-
FRP Cross Fittings ConnectorUS$ 1.05 - 3.05MOQ: 100 Sets
-
High Strength 200tex~2400tex Basalt Fiber RovingUS$ 3.15 - 3.2MOQ: 100 Kilograms
-
SMC Ceiling BMCUS$ 10 - 20MOQ: 100 Pieces
-
FRP/GRP Eliptical Tube for Chain SawNegotiableMOQ: 5000 Meters
-
Power Line Marker Marking SphereUS$ 3 - 5MOQ: 1000 Pieces
-
Fiberglass Angle ProfileNegotiableMOQ: 5000 Meters
-
Fiberglass Cable Conduit GRP ProfilesUS$ 0.5 - 5MOQ: 1000 Meters
-
GRP Grille Grille FRPUS$ 6 - 15MOQ: 1000 Square Meters
