Tine Tiller

Specifications

Tine tiller

1) Ideal for general cultivating, weeding, pasture renovating and preparing seed beds.

2) The tiller is available in 4 widths: 9, 11, 13 & 15 tines. The tiller is fully mounted on the tractor by means of category I or II three point hitch pins.

3) The spring loaded tines swing back under break-away pressure of 163 Kg: pass over the obstruction and return to the working position without affecting the working depth of the implement.

4) The continual flexing action of the tines shatters the soil breaking up the clods.

5) The tiller is fitted with 51mm reversible shovels which are designed for deep penetration.

6) A working depth up to 229 mm is possible in most soils and is simply controlled while sitting on the tractor seat.

Specifications;

1) Number of tines 9 11 13

2) Linkage category I 1 & II 1 & II

3) Frame round steel round steel round steel

Torsion tube Torsion tube Torsion tubes

4) Overall width 2180mm 2900mm 2900mm

5) Overall length 813mm 813mm 813mm

6) Tine spacing 178mm 229mm 229mm

229mm 254mm 254mm

7) Overall height 1.02m 1.02m 1.02m

8) Cultivating width 1880mm 2590mm 2790mm

9) Max. working depth 229mm 229mm 229mm

10) Weight settings 209kgs 236kgs 266kgs

11)Type of tines shovels spring loaded -51 mm reversible point

Tractor capability 25-36Hp 35-55Hp 60-85Hp