TY0252 low pressure Misting System,dry misting System

1. Connect the filter to the water tap, and then connect the misting system assembly to the filter.

2. Turn on the water tap to wash the system for 1 minute to purge the system and remove any impurities.

3. Screw the misting nozzles to the Tee fittings, except the last one on the end plug.

4. Turn on the water tap to wash the system for 2 minutes to insure that the system is fully purged.

5. Turn the water off and install the last nozzle into the fitting with the end plug.

6. Fix the misting line by the saddle clamps provided.

7. Turn on the tap slightly until jets are working, enjoy the cooling misting system .

8. Periodically remove the misting nozzles, and follow steps 2-5 to clean out the misting system.

9. Replace the filter as necessary.

....