Contact Platform Support
Help CenterWear Resistant Tungsten Carbide Plate/Parts Lathe Use for Cnc
Related Products
-
Cheapest Price Welding Insert Welding PlateUS$ 0.6 - 2MOQ: 200 Pieces -
Cemented Carbide High Wear Resistance Resistance Sleeve Tungsten Carbide Roll for Reinforced Concrete PipeUS$ 1 - 100MOQ: 10 Pieces
-
WC Alloy Tungsten Carbide Column TubeUS$ 0.6 - 2MOQ: 200 Pieces
-
Coal Mine Drilling Insert Tungsten Carbide DiscUS$ 0.6 - 2MOQ: 200 Pieces
-
Mining Drilling TipsUS$ 0.6 - 2MOQ: 200 Pieces
Santon manufactures special parts to customers based on defined physical dimensions, properties and customer supplied part prints. To properly define the part geometry, tolerances and acceptable properties, a complete description of the part is required. This information must be completely detailed at the time of the request. The checklist below is a guide to supplying the required information.
1.Material Type, if not, select SANTON grade from Standard grade of this procedure, taking into consideration necessary properties.
b.Part Dimensions and associated Tolerances.
2.Generate a physical description of the part that fully describes the part, physical properties (Hardness, Density, Percent Cobalt, Alloy Components), material type, and associated tolerances.
3.Required quantities based on an expected yearly basis and typical release/order volume.
4.Required delivery lead-time.
Send Inquiry to This Supplier
You May Also Like
-
Small Diameter Cast Grinding Balls Dia 4.8-40mm Cr 1%-28% High Hardness For Fine Grinding Cement CoalUS$ 600 - 2000MOQ: 34 Metric Tons
-
Customized Bimetal Hardfacing Chromium Carbide Overlay Wear Resistant PipeNegotiableMOQ: 1 Square Meter
-
Wear Resistance YG6/ YG8 Tungsten Carbide Wire Drawing DiesNegotiableMOQ: 1
-
Apv Tungsten Carbide SleevesUS$ 0.5 - 20MOQ: 20 Pieces
-
Tungsten Carbide Seal RingUS$ 50 - 500MOQ: 1 Piece
-
High Wear-Resistant Grinding Rods for Mining Rod MillNegotiableMOQ: 25 Metric Tons
-
Polymer Road Panel Temporary Road PanelUS$ 11 - 13MOQ: 500 Kilograms
-
ISO Standard and Best Price Carbide Tips Ss10 Carbide Stone Cutting TipsNegotiableMOQ: 20 Kilograms
-
UHMWPE Black Leg Pads for Heavy Machinery, Wear-resistant, Anti-slip, and High Load-bearingNegotiableMOQ: 1 Piece
-
Grinding Rod, Steel Grinding Bar, Grinding Bar, Grinding Ball, Forged Steel Grinding Ball DIA20-150MMNegotiableMOQ: 25 Metric Tons
