2013 New Type Dust Collector Price

Specifications

Dust Catcher
1.Manufacturer with 65 years' experiences
2.High dust elimination efficiency
3.Full automation.

Advantages characteristics:

 

1. It has modern design, it uses lower gas inlet structure, the rough high temperature granules directly drop to the dust hopper and effectively protects the filter bag.

 

2. It uses long filter bags and it has smaller floor area in case of equal processing capacity, therefore it is more convenient for reconstruction of old factories.

 

 3. It uses separate chamber offfline dust clearing with high efficiency and few secondary flour dust attachment, in the meantime, it can effectively reduce the equipment energy consumption, the fatigue level of filter bag and pulse valve is correspondingly reduced and the service life of filter bag and vane is prolonged by several times and equipement operation cost is remarkably reduced.

 

 4. The overhaul and bag replacement can be carried out for separate chambers under the condition that system blower and system run normally.

 

5. The filter bag inlet used spring tension structure, it is convenient to disassemble & assemble and it has good tightness.

 

6. The case uses airtightness design and it carries out leak detecting with oil and reduces air leak to the maximum extent.

 

 7. The whole set of equipment is controlled by PLC to realize automatic dust cleaning, dust removal, automatic temperature control and over temperature alarm.

 

Working principle

 

 Making use of the pressure of gas which inside and outside of dust bags, the gas through the bag into cleaning gas, and dust left on the bag surface. With the increase of dust on the bag surface, the filtration resistance will increase, according to the timecontrolled procedures injection system will make use of certain pressure and flow of air  to clear the surface dust  of each bag.

 

Technical parameters

Model	Capacity of wind (m3/h)	Filter wind speed m/min	Filter area (m2)	No. of filter-bags (piece)	Resistance (Pa)	Inlet dust concentration(g/m3)	Thermal insulation area  (m2)	Weight (kg)
32-3	6900	1.2-2.0	93	96	1470-1770	<1000	26.5	2.880
32-4	8930		124	128			34	4.080
32-5	11160		155	160			41	5.280
32-6	13390		186	192			48.5	6.480
64-4	17800		248	256			70	7.280
64-5	22300		310	320			94	9.960
64-6	26700		372	384			118	11.640
64-7	31200		434	448			142	13.320
64-8	35700		496	512			166	15.000
96-4	26800		372	384		<1300	110	10452
96-5	33400		465	480			120	12120
96-6	40100		557	576			130	14880
96-7	46800		650	672			140	16920
96-8	53510		744	768			150	19810
96-9	60100		836	864			160	21240
96-2×5	66900		929	960			175	25200
96-2×6	80700		1121	1152			210	30240
96-2×7	94100		1308	1344			245	35280
96-2×8	107600		1494	1536			280	40320
96-2×9	121000		1681	1728			315	45360
96-2×10	134500		1868	1920			350	50400
128-6	67300		935	768			125	24120
128-9	100900		1402	1152			196	31680
128-10	112100		1558	1280			205	34680
128-2×6	34600		1869	1536			323	43920
128-2×7	15700		2181	1792			247	52680
128-2×8	179400		2492	2084			262	60000
128-2×9	201900		2804	2304			277	66480
128-2×10	224300		3115	2561			292	72000
128-2×11	247600		3427	2856			307	78480
128-2×12	269100		3728	3072			322	96400
128-2×13	291600		4050	3328			337	93600
128-2×14	314000		4361	3584			252	100800