Contact Platform Support
Help Center2mdiameter*3.5m Lenght Pneumatic Fender for Boat and Offshore Marine Engineering
Related Products
-
Rubber Pneumatic Fenders 2.5m x 5.5mUS$ 300 - 1,000MOQ: 2 Pieces -
Sling Type Pneumatic Fenders Without Net D1.5*L3.0mUS$ 1,000 - 10,000MOQ: 4 Sets
-
Pneumatic Ship Rubber Fenders With Chain and Tire NetUS$ 1,000 - 10,000MOQ: 4 Sets
-
D2.0m*L3.5m Marine Pneumatic Rubber Fender for ShipsUS$ 1,000 - 5,000MOQ: 2 Sets
-
Pneumatic Rubber Fender for Vessels D2.5m*L5.5mUS$ 8,000 - 10,000MOQ: 4 Sets
Specifications
1.On Time Delivery2.Service life10years
3.Good tightness
4.standard-CB/T 3948-2001
5.Manufacturer for 20 years
FLORESCENCE PNEUMATIC FENDERS --- On-Time, On-Budget&On-Spec
Qingdao Florescence Rubber Products Co.,Ltd. delivers marine fendering systems to a global market. With a large pneumatic fender stock and quality guarantee according to ISO 17357, we ensure our customers the right products - on time.
Our products are used by a large variety of clientele within several industries. eg: tugboat builders and operators, pontoon builders and the off-shore industry.
Our fenders are supplied with tools for inflation and basic repairs(kit).
Pneumatic Fenders are manufactured as per ISO 17357: 2002 with 0.5 Kg/Cm2 and 0.8 Kg/Cm internal pressure.
1 safe for excess load marine
The reaction force of a floating pneumatic fender does not increase sharply even under excess load . therefore , these fenders perform extremely well under such condation and as a result , protect ships and mooring facilities .
2 No deterration or variation in performance
utilise the compressive elasticity of air , unchanged at extremely low temperatures .
3 safety realiability
using several layers of strong tyre cord are therefore extremely resistant to pressure and cutting , and are therefore extremely resistant to pressure and cutting .
4 construction
The fender body is constructed of an inner rubber layer , reinforcing cord layers and an outer rubber layer . All three layers are bonded together by a combination of heat and pressure over a period of time in a vulcanising oven .
5 Simple and low cost installation
the fender can be morred simply by means of a guy rope or chain at minimal cost it can be removed easily to another quay or jetty when not use or transfeered to alternative mooring points as required
6 chain and tyre net
the purpose of the chain and tyre net is to protec the fender body from damage by sharp objets
Application of Florescence fenders:
Florescence pneumatic rubber fender has widespread application on ship to ship,ship to wharf, oil tankers, container vessels, luxury yachts, ocean platforms, larges shipyards, military ports and larger under water foundations of bridges, etc.
Technical parameters of fenders :
D: 0.5-4.5meters
L: 1.0-12meters
Can be supplied customized size upon customers' request.
Qingdao Florescence Rubber Products Co.,Ltd is a leading professional manufacturer of marine fender in China for
20 years. We have more than 200 workers and covers 20,000 square meters of workshop now.
Send Inquiry to This Supplier
You May Also Like
-
Engine PartsNegotiableMOQ: 2000 Pieces
-
Advance 300 Marine Engine Gear Box Reduction Ratio 4:1NegotiableMOQ: 1 Box
-
Gorgeous Marine Steel Hatch Cover Supplier With Rich ExperienceUS$ 5 - 20.9MOQ: 500 Pieces
-
Rotomolding Pontoon FactoryUS$ 1 - 100MOQ: 500 Kilograms
-
1/4" Rope Lock Tie Down Boat RopeUS$ 0.5 - 2MOQ: 100 Pieces
-
Eva Foam Boat HullUS$ 100 - 100MOQ: 50 Pieces
-
15ppm Marine Oil Bilge SeparatorUS$ 2,000 - 40,000MOQ: 1 Unit
-
Yacht Dock Marine Pneumatic Boat Rubber Fender F4211- 16.8*4.4inchUS$ 7 - 11MOQ: 50 Sets
-
Super Cell Rubber FenderUS$ 4.4 - 6.28MOQ: 1 Ton
-
Engine Parts for Ship Vessel Marine EngineUS$ 2.99 - 49.99MOQ: 1000 Pieces
