heavy duty marine ship airbags

Specifications

marine ship airbag
1It can use 10 years
2Reliability and safety
3CCS/BV/ISO17357
4 good after-sale service

1Florescence marine airbags for ship launch&salvage

Florescence inflatable rubber airbag comply with ISO 14409. ship airbag can be used to launch and upgrade a ship up to 100,000DWT. Comparing to the traditional slipway launching method, the ship launching airbags are much environmental, because ship airbag can launch a ship at any seaside, so there's no need to worry about the construction of launching facilities; besides, the marine airbag need little maintenance and can be used repeatedly( about 65-80 times,10 years ).

 

Marine salvage airbags have the same body construction with the ship launching air bags.The airbag is constructed of an out rubber layer, multilayer heavy-duty synthetic-tire-cord layers, and an inner rubber layer vulcanized firmly. It has the cylindrical balloon body, with two conical head and terminal inflation iron inlet. 

2Our Rubber Airbag& Factory(USP) Advantages:

1.Dia1.2/1.5/1.8m airbag stock available(big discount),quick delivery
2.Lifespan:can be reused for 65-80 times,10 years 

3.Guaranteed period:12 months 

4.Certificates:CCS, BV,ISO etc

5.Provide repair rubber patch
6.Material:natural rubber, rubber-dipped nylon cord fabric
7.Factory with 20 years' experience

 

3How to use marine airbags to salvage ship:

 1.what equipments are needed to install / securing / inflate the air bags(for salvage)?
You will need diver to go under the water(install); and tie our deflated airbags with rope or net to

the bottom of your ship(securing);then inflate the airbag with air compression machine linked by 

rubber hose on the land(inflate ).

 

2. what is our warranty?

We cans assure that we can lift any ships as you wanted, as long as we get enough proper information

of the project and the ships are not too deep.

 

 

Besides the airbags, we can design suitable solution for your projects and provide any equipments that are need druring the salvage, including rope or rope net,  winch, rubber tube and air compression machine, etc.

 

4Standard specifications:

Diameter (D):	From 0.8m to 2.8m
Effective Length (EL):	From 6.0m to 28.0m
Total Length (TL):	From 7.0m to 21.5m
Standard Number of Layers:	Usually 4-10 layers
Loading Capacity:	About 10-40 T/M

5Application:

1.ship launching, lifting and refloating

2. floating bridge and dock construction

3.rescue and remove of wrecked ship

4.setting up temporary pontoon bridge pier and water transport channel

5.blocking debacle of anti-flood and anti typhoon dam

6.applying to short distance transport of the bridge, concrete piers, drilling equipment

 

6Guaranteed working pressure:

type	D=0.8m	D=1.0m	D=1.2m	D=1.5m	D=1.8m	D=2.0m
3 layers	0.13MPA	0.10MPA	0.09MPA	0.07MPA	0.06MPA	0.05MPA
4 layers	0.17MPA	0.13MPA	0.11MPA	0.09MPA	0.08MPA	0.07MPA
5 layers	0.21MPA	0.17MPA	0.14MPA	0.11MPA	0.09MPA	0.08MPA
6 layers	0.25MPA	0.20MPA	0.17MPA	0.13MPA	0.11MPA	0.10MPA
7 layers	0.29MPA	0.23MPA	0.20MPA	0.15MPA	0.13MPA	0.12MPA
8 layers	0.33MPA	0.26MPA	0.23MPA	0.17MPA	0.15MPA	0.14MPA

 

 

Any question, please feel free to contact me, we will reply to you within 24 hours.

----Michelle