Factory supply Three Roller steel Rolling Machine

WOOD CASE

Introduction:

Universal coil machine equipment electronic control system by the electric control cabinet, operation console. Power supply 380V / 50HZ. The main switch has a short protection and overload protection of the main motor. The positive and negative motor is controlled by AC contactor; the control circuit adopts relay control, reliable operation and long service life. The console has a finished product control button, indicator light to complete the operation of the machine and working state control.

Universal curling machine products are widely used in the boiler, shipbuilding, oil, carpentry, metal structure and other machinery manufacturing industry, universal bending machine as a special machine, it occupies an important position in the industrial base processing. Any steel molding for the cylindrical type, almost all with a roll machine roll system. Its in the automotive, military and other aspects of the application. According to different requirements, it can roll out the requirements of the steel column,  a very practical equipment.

Universal Bending Machine Main Components:

(1) Bending machine up and down roll: for the important parts of the Bending Machine, the material for the forging high-quality carbon steel.

(2) Bending Machine Rack: One of the left and right racks, the rack is equipped with the next roller bearing. The inside of the rack has a square screw, the upper end of the screw and the upper end of the roller bearing hinge. In the lower part of it is equipped with worm gear and screw vice. Rotate the nut in the worm wheel to cause the upper or lower.

(3) reducer: the use of  hard tooth surface reducer and pad together with the installation of the tank base.

(4) Bending machine unloading device: installed on the side of the reducer for unloading the balance on the roll; from the cylinder to complete the discharge and recovery.

(5) Base: welded by steel and steel plate. The rack, reducer, motor and so on are installed on it, thus forming a whole.

(6) electrical parts: all installed in a control box, easy to operate.

 If you want to know more, please feel free to contact us.