Factory good quality rotary drum dryer for fertilizer

         Factory good quality rotary drum dryer for fertilizer

1 .Energy efficient operation
2 .Self adjusting to demand
3 .Maintenance friendly
4 .Low noise deive gear

1.The rotary dryer is widely used for drying the chalk slags, coal powder, slags, clay and other materials in the building materials, metallurgy, chemical industry, cement industry. The rotary dryer has a better adaptability and can dry various materials with a simple and reliable operation.

2. The rotary dryer is mainly composed by the revolving body, lifting plate, driving device, supporting device, sealing ring and other components. So it has the advantages of reasonable structure, perfect in workmanship, high yield, low energy consumption, convenient to operate.

Performance Characteristics:

A.Large capacity ,continuous and stable operation;

B.High flexibility in operation.

C.Rotary speed and scattering device speed can be adjusted, and can meet the requirements of different materials;

D.It can meet the drying requirement by choosing different structure forms the copy board

1, Help you to choose suitable rotary dryer ;

2, Design rotary dryer Machine  according to your special requirements;

3, Answer your questions and give your detailed explanation timely and effectively;

4, After you confirm the order, if we have the right  Machine
in stock, we will arrange delivery immediately. If not, we will arrange production for you at once.

Pelletizing Process of the complete wood pellet production line:

1. Chipping&Crushing:

In the wood pellet plant before raw materials are made into biomass pellets, they are

first reduced into much smaller, uniformly-sized particles. When the thickness is larger than

10 mm or size is greater than 50*50 mm, a wood chipper is needed to chip these materials into

smaller pieces. The hammer mill is then used to further crush these small pieces into particles of

less than 3 mm in diameter.

2. Drying:

After raw materials are crushed a dryer is needed since most raw wood materials have

a moisture content of about 50%. However, the optimal moisture content for pelletiztion

is 13%-15%. Therefore a rotary dryer is included in the wood pellet plant to reduce the

moisture content. After crushing and drying you can begin making wood pellets.

3. Pelletizing:

After crushing and drying the raw material properly it is then ready for the pellet mill.

The pelletizing machine or press is the key piece of machinery in the wood pellet plant.

It should be mentioned that impurities in the raw materials like metal or stone,may

damage the die and rollers of wood pellet making machine.

4.Cooling:

Usually after pelletizing, the temperature of wood pellets is between 60-80 degrees and the moisture content is close to 15%. For storage purposes, a cooler

must be used to reduce their surface temperature and moisture content.

5. Packing:

Finally is the packing process. In order to protect the wood pellets becoming getting

damp and to increase storability, proper packing is necessary. Here we provide you

with the best domestic Semi-Auto Packing Machine.

1.Jinan Taichang Transmission Machinery Co.,Ltd located in Shandong province,China.

2.Our factory is a professional manufacturer of biomass pellet machine for agriculture, forest, pasturage,fishery and feed pellet machine and a set of machine line for pellets. 

3.Our factory mainly produce crushing equipment,screening eqiupment,drying equipment ,conveying eqiupment cooling eqiupment,packing eqiupment etc too.

4.Our company has passed ISO9001-2008 quality certification and CE certification.

1.Q:Are you a factory or trading company?
   A:We are a factory and trading company.

2.Q:How does your factory do regarding quality control?
   A:"Quality is priority. We always attach great importance to quality controlling from

      the very beginning to the very end. Our factory has gained CE, SGS authentication.

3.Q:I don't know how to select  suitable machine,can you help me?

    A:Yes,of course.Just tell me the next question,then i will recommend you best

     suitable model machine.

Place order or send inquiry we would like to know the following information:
-What kind of material you are going to dry?
-Capacity per hour you need?
-Moisture before and after dry you required?
-Fuel available for the dryer?

Please contact me

Thank you for reading my information,Please let me know if you have any questions.It's my honor to help you !