DIY Residue water down to 3 mm Utility Submersible Pump

DIY Residue water down to 3 mm Utility Submersible Pump

•  Non-corrosive super tough glass fiber reinforced thermoplastic motor housing, pump casing and impeller.

•  Built-in thermal overload protector.

•  Light weight and compacted design for portable residential usages.

•  Pumps residue water down to 3 mm.

The smart pump is operating uniquely by PCB that detects water. When the pump plug in,

it automatically detects water for 10 seconds. If the water level is high enough, the pump starts

pumping water out. If there's no water or the water level is too low, the pump will shut off

automatically for 3 minutes then detects water again for four seconds. After the pump detects

enough water, it automatically satarts to pump again. When the pump finds no water, it shuts off again.

The process continues cyclically unless it is unplugged. 

                                                                        Utility Submersible Pump

Our Products