Briquette machine biomass napier grass machine for make pellets

                              napier grass machine for make pellets 

napier grass machine for make pellets  all spare parts are handled by cnc machine.In order to reducing wear rate of roller and die for the pellet machine, 

tapered roller are used which has the features of high procesion, ifne workmanship. It can save much energy consumption and prolong the life service of

the mould. 

Body of the pellet mill are larger and groove is wide. 

napier grass machine for make pellets can press more kinds of sawdust, paddy straw, sunlower husk, stalk, wood chips, chemical waste and many other solid powder raw mateirals into pellets.

The raw material is under dried condition, which is compressed and formed into small eraser-sized bits, the final pellets is clean, pleasant and mooth, and its density is more than 1.0. We can also design it according to your request. The diameter of the pellets can be 6mm to 30mm. The length can be adjusted according to the requirement of the client.

Wood sawdust pellet machine is hot selling more than 6000 sets each year, we have big discount for old customer, greatly welcome to call and mail me for details.

Process to napier grass machine for make pellets

1 To wood logs: using wood chipper to crush wood logs to wood chips with size no more than 3cm, If water content in wood logs is more than 20%, then a dryer machine must be used before coming into napier grass machine for make pellets.

2 To make pellets from a wood pellet machine is not a very simple thing. if wod chips with moisture more than 20%, we should add one dyer to dry wood chips until less 15%. if very dry wood chips, then it can come into hammer mill directly, then sawdust will come out which can come into pellet machine directly. 

3 For sawdust with moisture more than 20%, need dryer to less than 15%, then make pellet directly.

4 If raw materials are palm fiber and efb, then further crushed should be necessary, dried until moisture less than 15%.

5 If raw materials are rice husk, no need to be crushed again, it can be made into pellets directly. 

napier grass machine for make pellets

1 Ring die type mould, vertically strucutre, ganulating chamber cooling. material feed directly in pellet forming chamber.

2 Double layers ring die, up and down dual use, lower cost, higher profit.

3 Die static, two roller rotating, and material centrifugal, evenly around.

4 Frequency adjusted feeding screw conveyor or belt conveyor,make sure the material can feed in time by adjust the speed of screw conveyor motor ,so make sure the high capacity.

5 The main press components adopt high alloy wear resistant material, the service life of wearing parts is two times than similar products.

6 Fully automatic lubrication pump,you just add enough high temperature oil,then it lubricate the two roller and main shaft automatically with timming time,make sure the sawdust pellet machine can work continuously more than 20hours.

7 Accuracy gear reducer box drive ,reducer all sealed ,save power ,make sure the ring die wood pellet machine work more efficiency and stable.

 Wood Chipper:

Wood chips crusher:

                                                                          Dryer

Pellet Machine:

                                                Cooler and dust removal plant