Gongyi xiaoyi mingyang machinery plant mini wood sawdust airflow dryer

Gongyi xiaoyi mingyang machinery plant mini wood sawdust airflow dryer

clients in our factory to see the dryer

Introduction : 

Drying is important before briquetting process. To get the superior quality of biomass briquettes with high density, it is necessary to control the moisture of material at 8-12% exactly. The selection of drying plant models depends on the original moisture content of raw materials.

Hot airflow type dryer
A: Raw materials should be sawdust, suitable for drying the moisture20-50% Final moisture 8-12% .                          
B: Diameter of raw materials: <3mm & < 5mm.                    
C: Temperature of Hot Air: 180-250 °.                        
D: This wood dryer reduces the moisture to 8-12% with the advantages of lower cost consumption and high efficiency.

Features:

1). In hot air stream 95% to 98% of moisture can be evaporated immediately;
2). Quick drying speed: the surface area of material liquid through atomizing is increased greatly;
3). Product has good uniformity, fluidity, solubility, high pure and quality;
4). For liquid containing 0-60% of damp(special may be 90%). It can be dried to powder through drying one time;
5). After dried, not necessary to crush, sieve therefore reducing productive procedure;

The final products:

Rotary drum dryer
A: Rotary Dryer is special designed to dry the Wood material which combines the function of drying and cooling, so it can save 30-50% energy.
B: Rotary type dryer shows the features of perfect drying effect, easy operation, high efficiency and easy control of drying. It takes advantage of the stability of roller and homogeneity of air suitable for drying materials of moisture 30-60% .It has the larger capacity , can meet the high capacity need.