best choice bamboo/wood biomass powder briquette coal carbonization furnace

 1. introduction of best choice bamboo/wood  biomass powder  briquette coal carbonization furnace

best choice bamboo/wood  biomass powder briquette coal carbonization furnace is our new invent, which is also combined type. this kind of carbonization stove are included three inner  stove, when one inner stove are finished,  it can be hoisted outside,.  And when the first inner stove are cooling , the other inner stove can be carbonized at the same time, in this way the cooling time can be reduced much, thus, the productive efficiency increase a lot .This type of stove adopts the structure of unique air storage chamber, to fully reuse the smoke produced during the process of carbonization. And the redundant smoke can be used in drying and carbonizing, saving much fuel during the whole process, and increasing the enterprise revenue.   And there is little smoking and pollution during the producing.

2. raw material and final product of best choice bamboo/wood  biomass powder  briquette coal carbonization furnace

Raw Materials: Sawdust, Crops Straw(corn stalk, beanstalk, broomcorn stalk, cotton stalk, rape stalk,palm kernel shell, groundnut stem, sunflower stalk), Husk, Grass, Bush branches, Bamboo butt, Bamboo scraps, Bagasse and so on.

3. working principle of best choice bamboo/wood  biomass powder  briquette coal carbonization furnace

The surface of wood (bamboo, wood briquette, nut shell, etc) will ignite spontaneously in the hypoxic condition. And this spontaneous combustion will produce heat. This heat and the external heat source will heat the stove at the same time, when the temperature reach 280 degree, the chemical structure of the wood will be changed by the high-temperature, and after long time heating, changing and decomposing, then we will get the black charcoal, combustible gas, and wood tar. This model furnace will use the fume extraction tube to recycle all the combustible gas and smoking from the entire heat source. 

4. structure of best choice bamboo/wood  biomass powder  briquette coal carbonization furnace

This best choice bamboo/wood  biomass powder  briquette coal carbonization furnace is the cylinder shape. And this model stove consist of outer stove, inner stove,fume extraction tube, smoking purification system and hoisting equipment. And there are the detail structure drawing in the following of the introduction book

1. outer stove includes heating room (for heating the stove), furnace body and heat-keeping layer (it is made of the heat insulating material, used for keep the heating)

2. inner stove (The inner stove): consist of the stove tank body and the sealed top cap. Both of them are made of the heat resistance thermal steel. one set of carbonization stove include two or three inner stove, and the diameter are 1460mm, 1430mm, and 1400mm, and the three inner stove can be stack together, easy for loading and transporting ,and it will save a lot of space and transport charge.

3. Fume extraction tube: When during the process of carbonizing, there will be some smoke.(can be burning) the smoke can return to the furnace through tube for purifying, after purification , the combustible smoking can be flow into the heating room of the outer stove  for heating the stove again,

4. Smoking purification system

This system is consisting of purification tank and the exhaust-heated cycle pipe.  And the smoking purification system are used for purify the smoking (can not burning) and filter the wood tar. The smoking through the purification system will become water vapor, and it will not pollute the air.

5. The hoisting equipment: it include the steel hoisting frame and the E-hoist .And it is easy for loading and unloading the stove, and can reduce labor intensity, and it can be avoid the high-temperature burn when lift the inner stove

ing process of best choice bamboo/wood  biomass powder  briquette coal carbonization furnace

1.Heating process: after putting the inner baskets into the furnace, we need to heat the furnace up to 80-120mins, the temperature get around 300-330 ℃,it will produce the gas(CH4,C2H4) or biomass waste as fuel,at this time,we stop heating
2.Carbonizing process: after doing the sealing work, the materials inside begin to pyrolysis, it will produce gas at this period, so we need heating in this process, the carbonization time is often around 8-12hours
3. Cooling process: after carbonizing, we need to take the inner basket out , let it cool by natural way,cooling time is often around 8-10 hours. Cooling time is longer, it is better for stove quality
4. After taking the inner basket out, we need to put another basket inside, this is the cycling process.

 6. advantage of best choice bamboo/wood  biomass powder  briquette coal carbonization furnace

1. High carbonization rate ,and high quality final product,

2.High output: 24hours can carbonizing 3-4 inner stove, so the capacity is 2-3ton/day ( for the QHL-1)                                       3.energy-saving ( 1000kg charcoal just need 30kg firewood or 15kg liquid gas for heating)            

4.smokeless , little pollution                                                                                 

(1) the frog and the gas flow will be recycle from the smoke recycle device and use for heating the kiln again                                    (2)We install a special device that can use the liquid gas as the energy to heating the carbonization kiln, and it will not produce any smoke.                                                                                                                                                                                                                    5.Easy-operation:                                         

Every stove we will install one hoisting device with E-hoist , it will save the labour intensity,and the hoisting device can be rotary at 360 degree , it is easy for the operating                                                                   

 6.easy for transport, save much transport charge :                                                              

 the inner stove can be stack together when loading, it will save almost 50% space, it will save much money                               

7.suitable for all kinds of raw material ,we have do the test, this model carbonization stove suitable for the coconut shell, palm shell, bamboo, wood ,wood briquette, and other nut shell and get good quality, 

7.models and specification of best choice bamboo/wood  biomass powder  briquette coal carbonization furnace

 for the best choice bamboo/wood  biomass powder  briquette coal carbonization furnace machine, we will delivery with the 20 feet or 40feet container with the rainclothes 

 Gongyi Xiaoyi Mingyang Machinery Plant is one of the largest and earliest manufacturers of the biomass energy equipment ( biomass briquette machine line, charcoal making production line, wood pellet production line and the related machinery)

 We are professional

1) more than 120 experienced workers, over 12000 square meter workshop, 

2) high level standard workshop, advanced producing equipment, Experienced technicians, fine workmanship with 25 year working experience

3)produced 6 production line, more than 150 kinds of machines, awarded 10 patents in China

 We are confident

1)Products are widely accepted in both domestic and world market ,export to more than 150 countries

2)have been get the CE, SGS, ISO9001 :2008 and the other international quality standard .

 We are fast and efficient

1) We have the experienced workers and efficient assembly line,  and we have a long-term stable cooperation in logistics providers. So we never delayed for the delivery

2) We have the efficient management system,  each department cooperated smoothly and efficiently .

3) We have the professional sale service team to give you more fast and efficient service

We are tolerably thoughtful

1) We have stock for based goods, accessories in stock to meet you need,stocked your samples and all the details of the goods of the next order.

2) We have strict inspection personnel and process, and we are strictly ensure the quality of the international standard

3) We have the test center of the machine, Each machine will running before delivery

4) recommend clients for free, offer the layout drawing and the profit table and  install video and free stuff training

We are carefulness and honest

1) We pay attention to each working step and each parts of the machinery to give you high level products

2) During the past 25 years, our products are deeply welcome in the domestic and oversea market, and also gained lots of honors

We are dedicated and innovative.

1) We have one outstanding working team for the research and development of the machinery

2)We believe the idea of "pursue the perfect, customer---the highest" could ensure the quality.

After 25 years development, now our company becomes an independent economic entity with the integration of science, engineering and trading department. our products and are widely accepted in both domestic and world market, and also exported to more than 100 countries, such as England, Russia, Sweden, Poland, Iran, Sudan, South Malaysia, Indonesia, Vietnam, etc.  

We offer 24 hours on-line service, if you need any help, please contact with me,  we are glad to help you.