Slaughter House /Hot Water Scalder Conveyor Model

Hot Water Scalder Conveyor Model

Structure Features

1.all made of stainless steel ,meet the needs of food hygienic standard

lsed box structure,minimum steam loss

3.heat exchange methond is adopted to avoid scalding poultry body 

4.pneumatic turbulent mixing ,the temperature uniform ,full of scalding 

5.equipment assembly structure ,can be assembled into a different model 

CHICKEN SLAUGHTERING MACHINE

1.Killing conveyor line

Chicken will be processed on this rail, it is main part for the main slaughter plant Production line.

The distance of hangers is 8inch.

Stainless steel chain, guide rails, stainless steel hooks, nylon hanger

2Electric  Stunning  machine

fiberglass reinforced plastic 

reliable and  stable electrical devices

L=1.5METERS

3Scalding machine

This machine is used to scald the carcass of the chicken to remove the feather easily;

Size:4000mm×950mm×2400mm.

Thickness of Board: 2mm,Upper Cover Thickness :1.2mm,Supporting Leg Thickness:2mm.

Temperature between 58C°-61C° of the water

use blower system and  impact pressure system make to produce highly scalder results.

Power:6KW

4A Frame Primary Plucker

This plucker is dedicated device for chickens ,there are 4 main parts: Depilation, regulation section, guide part, spray part.

Principal part is stainless steel

Shape Size:3350*2350*2350

De-feather Machine consists of four boxes .Each line has 12 plates .Total 6 lines with 72plates.

Power :3KW *6=18kw/set

5Automatic cut head machine

this equipment use to auto cut the head on production line

Principal part is stainless steel 

6Automatic cut claw machine

this equipment use to auto cut the feet on production line

Principal part is stainless steel

this equipment use dedicated accurate chuck location had high quality feet

7Unloading claws device

this equipment will be auto  take off the feet from production line

All body is stainless steel 

8Drivng device

This machine is to run the whole hang rail

including: motor , reducer , brackets and other drive components

Power:2.2KW  By inverter power, run more smoothly.

9Frequency converter 

Frequency Controlling Box.

Stainless steel Box

3.7kw

10Tension device 

To control the convey rail length and tight

Stainless steel structure

11Spiral precooling machine

This device can replace the precooling line to precooling the chicken carcass

This machine used to low down the temperature of carcass to keep the carcass good-looking and keep fresh in the forward process.

The Thickness of the tank made of 3 stainless steel

Spiral Pushing Device is melted by 2mm thick stainless steel.

Power 5.2kw/set

ONE  sets of Fan to make bubbles in the water in the tank efficiently so that improve cooling result and clean the carcass too

Shape Size:L=5000*2160*H

Buyer Also Need To Prepare cold  Water Or A Piece Of Ice MachineBuyer prepare workspace