2015 Yuhong Lime stone rotary kiln for Steel Making Industry

Iimestone Kiln for Steelmaking Industry !

Process flow introduction: Qualified limestone is deposited in the storage bin, hoisted by the elevator and transported into the top bin of preheater. The top storage bin of the pre-heater is consisted of top and bottom level gages controlling the feeding. And then through the feed tube the limestone is distributed uniformly to all the inside chambers of the pre-heater.

The limestone in preheater is heated to about 900°C by 1150°C kiln gas, about 30% decomposition, pushed into rotary kiln by the hydraulic push rod, and sintered and decomposed into CaO and CO2 in the roatary kiln. After decomposition, the produced limestone goes into the cooler, cooled down to 100°C by the entered cold air and discharged out. The 600 ° C hot air after heat exchange goes into the kiln and combusts with gas. The Exhaust gas goes into the bag filler through draught fan when added into the cold air, and enter the chimney through the exhaust fan.
The limestone in the pre-heater is heated to around 900 ° C by the kiln flue gas of 1150 ° C. At this time, about 30% of the limestone has been decomposition. Then the limestone is put into the rotary kiln by the hydraulic stem. In the rotary kiln the limestone sinters and decomposes into CaO and CO2. Then the decomposed limestone goes into the cooler and is cooled to about 100 ° C by the cold air and then is discharged. The 600 ° C hot air after heat exchange goes into the kiln and combusts with gas. The Exhaust gas blended with the cold wind go to the bag filter through the suction fan and then through the exhaust fan into the chimney.

The lime out of the cooler is transported into lime storehouse by vibration feeding machine, chain conveyor, bucket elevator, belt conveyor according to the customer’s request for whether making the screening other procedures.
Structures of Iime Stone Kiln :

The Horizontal Lime Kiln is composed of cylinder, supporting device, supporting device with catch wheel, transmission device, active kiln head, sealing device, burning device and feeding device and kiln head combustion equipment etc.

The Horizontal Lime Kiln is a circular cylinder, which is obliquely installed on several pairs of tugs. After the motor decelerating, the cylinder revolves around by the small gear driving big gear.

Main Technical Parameters for the Iime Stone Kiln :

Parameter of  High Efficiency Iime Stone Kiln :

Photos for the Iime Stone Kiln :

 the Active Lime Production Line are including in the vertical preheater ,lime kiln ,verilcal cooler (or rotary cooler), the feeding system ,discharging system ,burner system.dusct catcher ,and so on.YUHONG Brand rotary kiln are  sell well all over the world .

Welcome old and new clients come to patronize.  

Machining equipment of Iime Stone Kiln :