magnetic vibrating feeder mostly used in flow production line

Specifications

magnetic Vibrating feeder:
1. Stable and long span life.
2. Easy to adjust.
3. Reliable operation.
4. Easy maintena

MagneticVibrating Feeder Introduction:

Vibrating feeder is a kind of linear direction feeding equipment, and also called Vibratory feeder. It features smooth vibrating, reliable operation, long service life and being suitable for feeding. They are widely used in mining, building-material, silicate and chemical industry in the crushing and screening plants.

 

Vibrating Feeder Features:

(1) Small cubage, light weight, simple structure, easily fixed no movement assembly, no lubricate, maintain easily.

(2) Electric Magnetic feeder uses up electric energy less, because of the engine vibrating resonance principle and double plastid works at the low critical nearly resonance.

 

(3) Because it can change and start or off material flow instantaneously, the feeding size is higher accuracy.

 

(4) Control equipment of this series Electric-Magnetic Vibrating Machine uses the controlled silicon half wave whole line, in the use, according to adjusting controlled opened corner easily to adjust the feeding size, achieve the produce line is controlled by concentrating automatically.

 

(5) Because the material that in the chute is continuously thrown when feeding, and along the track of parabola moves bound toward, the damage of chute feeder is little.

 

(6) This series Electric-Vibrating Feeder is not suitable for the flameproof conditions.

 

 

 

 

 

 

 

Vibrating Feeder Working principle:

Vibrating feeder consists of vibrating frame, spring, vibrator, motor vibrating device and motor. The vibrator is made of two fixed eccentric shafts whose gearsare jogged. When installation, the two gears must be jogged according to the sign. Through drive of the motor, the two eccentric shafts start rotating to producea linear huge power which forces the feeder to vibrate. Through the vibration, the materials will slip and sling on the funnel, moving forward, when the materials. Pass the screening part, smaller parts will fall down, and avoiding the furthercrushing, so screening purpose can be reached.

 

 

Technical Parameters: