Oil Mill Machinery Tubular Centrifuge Used for Oil-water Separation in Waste Oil Recovery Process

Oil mill machinery tubular centrifuge used for oil-water separation in waste oil recovery process

GF is a terrific separating machine with a strong separating capacity, its separating factor can be at1100rpm and able to achieve liquid-solid or liquid-liquid solid-phase separation.

It can widely used in the area of the separation of many kinds of oils, just like oils, plant oils, animal oils, fish oils, and various fuel oils, etc; The clarification of milk products, the fruit juices and separation of beer, as well as separation and clarification of fermentation liquids during fermentation brewing.

The structure of tubular filter

 The bowl will be driven by the main motor by the friction clutch and screw gear pair to rotate highly around the mainshaft,Stock liquid flows from the center charging inlet on the top to the bottom through the charging pipe.And then passes through discs seats to the bowl's space. The bigger gravity solid phase particles in the stock liquid is settled down to the bowl's wall bu the centrifugal force and then under the control of the side bowl drained out of the residue outlet but liquid phaseis fully settled down to the bowl wall by the centrifugal force field and then under the control of the slide bowl it is drained out ofthe residue outlet but liquid phase is fully settled down to the center along the discs to drain out by the centripetal pump.

Parameter for Centrifuge machine