Quality and capacity no have to doubt hot sale stock feed plants

Specifications

Quality and capacity no have to doubt hot sale fodder pellet granulator
stock feed plants
No doubt
Hot sale

Quality and capacity no have to doubt hot sale fodder pellet granulator

Model	Capacity	Power of main motor	Power of conditioner	Diameter of ring die	Feeder power	Size of final pellets
SZLH250	1~2t/h	22KW	1.5 KW	250mm	0.75KW	1.5~12 mm
SZLH320	2~4t/h	37 KW	2.2 KW	320mm	1.5KW	1.5~12 mm
SZLH350	2~6t/h	55 KW	2.2 KW	350mm	1.5KW	1.5~12mm
SZLH420	4~12t/h	110 KW	5.5 KW	420mm	1.5KW	1.5~18mm
SZLH508	4~18t/h	160 KW	7.5 KW	508mm	2.2KW	2~18mm

Main technical parameter of stock feed plants

Equipments of Feed pellet line
Yield	1-2t/h	3 t/h	5 t/h	6-8 t/h	10t/h	15 t/h
Pellet machine	SZLH250	SZLH32	SZLH35	SZLH400	SZLH420	SZLH508
Hammer mill	SWSP56*30	SWSP56*40	SWSP56*60	SWSP56*60	SWSP66*80	SWSP112*40
Mixer	SHW1.0	SLHY1.0	SLHY2.0	SLHSJ1.0	SLHSY2.0	SLHSJ2.0
Cooler	SKLN11*11	SKLN15*15	SKLN15*15	SKLN19*19	SKLN19*19	SKLN22*22
Rotary screener	SFJH80*2d	SFJH100*2d	SFJH100*2d	SFJH130*2d	SFJH130*2d	SFJH150*2d
Crumbler	SSLG22*40	SSLG15*100	SSLG15*100	SSLG15*150	SSLG24*110	SSLG24*165
Cooling fan	4-72No4A	4-72No5A	4-72No5A	4-72No8D	4-72No8D	4-72No8C
Cooling discharger	XL60	XL90	XL90	XL120	XL120	XL150
Boiler	LSG-0.3-0.4	LSG-0.3-0.4	LSG-0.5-0.4	LSG-1.0-0.7	LSG-1.0-0.7	LSG-1.0-0.7
Lifting equipment	TDTG26*18	TDTG26*18	TDTG36*23	TDTG36*28	TDTG36*28	TDTG50*23
Outline dimension Length*width*height	9*3.5*11	9*3.5*12	12*4.2*13.5	12*4.5*14	13.5*4.8*14	15*5.5*17

Introduction of stock feed plants 

Feed pellet production line consists of eight sections: raw materials--- cleaning---crushing---mixing---pelleting---cooling---crumbling---sieving---packing

1.Cleaning section of stock feed plants

Pre-cleaning is a process of removing unwanted material from our ingredients. As we received the material, there will be possibility of having unwanted material such as iron pieces, jutes threads, oversize pieces which can jam our silos system. So for cleaning we use a pre-cleaning machine. Then these pre-cleaned materials are transpired to silos through mechanical conveyors and elevators.

2.Crushing section of stock feed plants

Grinding is a process of bracking solid ingredients to a required size. Finer the material higher will be the surface area exposure to heat and moisture to accomplish the gelatinization in conditioning. A fine granding material can transfer his maximum energy to the animal as compare to a course grinded material. It is a very energy consuming process. 

3.Mixing section of stock feed plants

As the name implies "Mixing" is a process of combining blending of micro ingredients. A proper mixing can be defined with a unit called co-efficient of variation. Smaller the co-efficient of variation higher will be the quality of mixing. Our well designed mixer machine has such a great quality. Beyond this is a mixer machine should have a provision to mix liquid to it as we need oil or molasses addition to the feed.

4.Pelleting section of stock feed plants

Pelleting is a main step of any pelleting plant. It is a process of converting any powder to solid shape called pallet. In this process the powder material is extruded through a well designed die with the help of rollers to convert it in to pallets. The quality & production of pallet mill depends on so many parameters. 
1. Feed formula 2. Die configuration 3. Quality of Granding 4. Quality of conditioning. No doubt every material can be converted into pellets.

5.Cooling Section of stock feed plants

Cooling is a process of removing heat. As we know during conditioning we add heat and moisture and also 

through palleting process heat generates by extrusion process. But the pallet should have a standard 

moisture and heat to attain its life of storage and make it safe from fungus. So we have to remove extra heat

and moisture from the pallet. All this is done with the help of a well designed counter flow cooler. 

6.Crumbling section of stock feed plants

Crumbling is a process in which pallets after cooling is broken in to small pieces to make it suitable for small chicks or hens. When there is no need of crumbling, we by-pass the feed directly to the screen with the help of By-pass Mechanism. A well designed crumbier should have capability to break the pellets without making much finer. 

7.Sieving section of stock feed plants

Product coming out of crumbier is or their in pallets form (if we use by-pass) or in crumbs form. There are required to screen to remove fines and oversize particle. A double deck screeners are used to remove both fine and oversize particles. Fine and directed to pallet mill for repalleting while oversize particles are directed to crumbier for reprocessing. A well desired screener should have capability to remove fine and oversize to a desired percentages, And it should not be clog frequently. 

8.Packing Section of stock feed plants

The end of process in every plant is bagging also called packing. After screening the finished products are filled in to bags. In small and medium plants, bagging can be carried out manually but for higher 

production it is batter to go for electronic bagging machine

9. Auxiliary section of stock feed plants

9.1 pulse dust collector

9.2 air compressor

9.3 pipeline and accessories

1. 24 hours rapid response for full-time.

2. We make maintenance plans for each equipment from our factory.

3. We provide operating training for every customer.

4. We remind the customer termly to maintain the machine.

1. According to specific size of each equipment, we twine thick plastic coating for each machine.

2. Tight the equipment in the truck without space to ensure no rubbing during the transportation.

5.Overseas clients

6.Flow chart

 

7.Certification

 

1.What international certificates we have?

---Our company has passed ISO9001-2008 quality certification,SGS quality certification,CE safety and quality certification of EU,German Rhine enterprise capability assessment(TUV certification)

2.How can we guarantee the quality of machines?

---Our company promised that the material thickness of our main equipments is greater than the feed machinery industry standard 2 mm. You can pick up the vernier caliper and calculator to weigh and test. About equipment accessories, crusher adopts NSK bearings; Pellet machine adopts the Swiss SKF bearing; Equipments adopts Siemens motor.

3.How about our export power?

---Since we opened the foreign trade,insisting "Impress customers with details , win customers with quality , conquer customers with services.", the value of export is rising steadily. Our export value of 2013 reached 3 million dollars. Now our products has exported to Vietnam,Sudan,Mongolia,South Korea and other 50 countries and districts. In 2013, our company become the only supply enterprises exempted from inspection determined by Mongolia ministry of agriculture. Now we have 34 foreign trade service staffs,to offer you 24 hours' service!

4. Are you a trading company or a manufacturer?

---We are a manufacturer, which has almost 19 years of experience in this industry. We Hengmu Husbandry Machinery Co.,Ltd is located in the south of Yuntai Mountain, a beautiful world geology park, warmly welcome you to vistit the beauty and our manufacturer.

5. Will you send engineers to install the plant?

---yes, but at an extra cost payable by the customer. Or you can get local contractors to do the commissioning and we send one supervising engineer.

6.What is our products and market positioning?

---Our company won’t use the low price to win the market. We mainly produce middle and high-end products,to conquer the customers relying our products and service.

7.What service we can supply?

---In pre-sales we provide users with comprehensive technical support. We provide comprehensive customer training, including in charge of the procedures, operating procedures, maintenance procedures, equipment, general maintenance, equipment, long-term hazard assessment knowledge and so on. Before the users buy our equipment, they must come to our company to accept a series of training. After the examination for equipment operation personnel, we will issue husbandry machinery operation qualification certificate. We suggest user to set up the remote control system. Our company after-sales service can guide the user through the remote control system for regular maintenance equipment key parts. Our aim is: to do a responsible enterprise, let customers safely use the best feed machinery!

10.My card  

Welcome to our factory!