Low processing cost affordable biomass pellet production line

Low processing cost affordable biomass pellet production line

The introduction of biomass pellet production line

Complete wood pellet production line is designed for industrial production to make biomass pellets from any type of agro and forestry wastes with output from 1 ton to 10 ton per hour. 

The process of wood pellet production line include: raw materials preparation, wood crushing (For logs and other biomass materials more than 5mm in dia.), sawdust drying (if the raw material contains moisture of more than 18%), wood pellets pelletizing, wood pellet cooling, biomass pellets packing.

Raw materials preparation

Wood pellets can be made from sawdust, wood shavings, wood chips or wood logs, any forestry wastes or biomass straws, stalks, etc.

Raw Material Crushing Process

Crushing machine is used for crushing the larger materials into smaller powder for supporting produce wood pellets.

Biomass Material Drying Process

The best moisture content to pelletizing is about 11-17%. So before pelletizing, a drying machine is needed to make the moisture content reaches the required standard

Wood Pelletizing Process

Pellet mill is the significant part of the wood pellet line, and has reliable and stable performance. Capacity ranges from 1ton to ton per hour. You can choose ring die pellet mill or flat die pellet mill depend on your capacity requirements.

Wood Pellet Cooling Process

After pelletizing process, the temperature of wood pellets is between 60-80 degrees and the moisture content is close to 15%. So a cooler must be used to reduce their surface temperature and the moisture content which makes the wood pellets easy to store, meanwhile helps screen good and pure pellets.

Wood Pellet Packing Process

After the cooling process, packing process is necessary to protect the wood pellets from the damp.

Final pellets

The finished wood pellets are widely used for heating purposes of industrial boilers and large power plants as well as home use to alleviate the energy crisis and meet eco-friendly requirements.

What we can offer you

1) Inquiry and consulting support, sample testing support and view our Factory.

2)Training how to instal the machine, training how to use the machine and engineers available to service machinery overseas.

Information you may want to know 

1. Q: Are you a trading company or a manufacturer?
A: We are a manufacturer, which has almost 19 years of experience in this industry.
2. Q: How long is your guarantee?
A: One Year (Calculated from the equipment arrives the customer's side.). After this period we will definitely still support you when needed. You will be welcome to contact us with any problem and experience.
3. Q: Will you send engineers to install the plant?
A: Yes, but at an extra cost payable by the customer. Or you can get local contractors to do the commissioning and we send one supervising engineer.

The reasons why you choose our company

1) Pursue the highest level of Feed Processing Manchinery in China, encourage customers to inspect machineries by caliper and calculator. Select Siemens Motor, Choose Swedish SKF Bearing.
2) Transform factory into university, bulid the most professional training & trusteeship team in Chinese feed industry, Ensure that Hengmu Machinery can be runing in a healthy condition by remote supervisory control and the nanny trusteeship service.