China skillful supplier for wood sawdust dryer with low price

China skillful supplier for wood sawdust dryer with low price:

Introduction for wood sawdust dryer machine:

1. It is professionally designed for drying different kinds of wood sawdust. This wood sawdust dryer machine has advantages of low cost, low consumption,high capacity, easy operation and maintain, 

etc. In addition, the round places of pipes can be changed to any angle which can save space and

solve plant dimension limitation. 

 
2.It is suitable for drying materials like sawdust, rice hull, milling wheat straw, corn stalks and so on. The moisture of wet materials is at 20-30%. The wood sawduat dryer machine can reduce the 

moisture to 8-12% one drying time.

Features of airflow wood sawdust dryer machine:

1.High drying strength;

High flow speed of wood sawdust dryer machinecan distribute material in the hot air fully to contact the heat current.

2.Short drying time:

The short contact time between material and air,commonly 0.5-4 seconds,which  will not cause thermal sensitive or low melting point material overheated or broken down and effect the material quality.

3.High thermal effciency

Airflow wood sawdust dryer machine adopts material and heat flow parallel current operation,and during the whole dring process the temperature is controlled in an exact condition.Those makes material can be dried at high temperature in short time.

4.Wide application,high capacity,high water reduction,simple structure,small occupation,low investment and low maintenance rate are all the obvious advantages of wood sawdust dryer machine.

5.This dryer hot air source is from oil burner,gas furnace,coal stove,steam heat exchanger.

Applicable scope for airflow wood sawdust dryer machine:

Airflow wood sawdust dryer is suitable for drying powdered and granular materials, such as starch,

tapioca flour, gluten, flour additives, fish meal, distillers grains, corn gluten, grass, grass meal, 

titanium dioxide, activated carbon, sodium fluoride, fluorite mine, silica powder, synthetic resin,

calcium phosphate, biomycin, sodium silicate, dextrose, sodium sulfate, sulfide ore, phosphate rock,

fused phosphate, ferric oxide, calcium carbonate, ilmenite, iron oxide , potato granules, tea meal, 

medicine, pharmacy, coal, wood saw powder. 

Technical Parameter of airflow wood sawdust dryer machine:

Airflow Wood Sawdust Dryer Machine drying efficiency:
The hot air temperature can be adjusted from 180 °C to 300 °C. 
the wood sawdust dryer machine can dry the moisture content from 35% to 10%.

heating fuel can choose: wood (broken wood), coal, steam or electrical heating.

450 type airflow wood swdust dryer machine:

650 type airflow wood sawdust dryer machine:

950 type airflow wood sawdust dryer machine:

Working principles of airflow wood sawduat dryer machine:

The airflow wood sawdust cdryer machine is to send the wet particulate material into the hot air flow,

and with the parallel flow, the wet raw materials compounds with high temperature air. Eventually 

moisture is separated by airflow dryer machine from the raw material through the separator,and 

we can get dried particulate products. This airflowflow dryer machine works well on developing

feed resources, and reducing feeding costs and environmental pollution .

Structure of airflow wood sawdust dryer machine:

Firewood ( chopped firewood ), coal, steam or electric heating all can be the fuels for airflow wood sawdust dryer machine. Brcause of the low energy consumption and high efficiency, the fuel will be cost less. So the airflow wood sawdust dryer machine is an ideal equipment for drying pellet feeds and powder feeds.

Parts of airflow wood sawdust dryer machine: 

Working Theory of wood sawduat dryer:
Raw materials go into the stove of wood sawdust dryer machine and then are sucked into the cyclone together with hot air through pipes. After-drying material will be discharged from the cyclone, but waste hot air and water vapor will go out from the top of the cyclone directly.
Notes:
1. Do not feed raw materials until the hot air temperature at the air outlet gets to 150℃.
2. It will be better to screen large particles before feeding materials, which will improve the drying efficiency. 

Factory of processing site:

Package and delivery for the finished equipment:

Pre-Sales Service:

1)  Offering comprehensive technical and business consultation services for airflow wood sawdust dryer machine;

2)  Proposing the most suitable scheme for airflow wood sawdust dryer machine for our clients;

3)  Designing and fabricating targeted products according to the special requirements of clients; 

4)  Training periodically high qualified service technician.

After-sales Service: 

1)  Highly inspecting equipments in every working procedure, quality comes first;

2)   Fast & Safe Delivery for the airflow wood sawdust dryer machine with standard exporting packages; 

3)  Assisting our clients for foundation construction of equipments;  

4)  Dispatching engineers to install and debug equipments; 

5)  Training the first-line operators on site; 

6)  Regularly visit clients to solve production problems 

7)  Providing life-long maintenance service;

8)  Providing technical exchanging;  

If you have any need or question, please feel freely to contact us: