Home > Products > Tyre Recycling Plant > 1-6mm Rubber Granules Made by Waste Tire Rubber Crumb Plant
1-6mm Rubber Granules Made by Waste Tire Rubber Crumb Plant
- 50 Set / Sets per Month
- Qingdao Dalian Tianjin Shanghai Guangzhou
- T/T L/C D/P D/A Credit Card PayPal
Product Details
Condition: | New | Type: | Rubber Cutting Machine | Place of Origin: | Hainan, China |
Brand Name: | ODF | Model Number: | XKP- 400 450 560 | Voltage: | 380V |
Power(W): | 70KW | Dimension(L*W*H): | 2.3*3*4.5 | Weight: | 9.5T--17T |
Certification: | CE ISO9001 | Warranty: | 3 years warranty | After-sales Service Provided: | Engineers available to service machinery overseas |
Product Description
1-6mm Rubber Granules Made by Waste Tire Rubber Crumb Plant
Our whole production line is used to make waste tires and rubber into rubber crumb and rubber powder.
Major flow: Waste tires-circle cutting-strip cutting-block cutting-grind into powder-magnetic separating-separation-packing-put in storage.
Your benefit and Profit
Short response time and expert support in emergencies
1.Service hotline
2.Highly qualified and experienced service engineers
3.General overhauls on site and at the RTE Service Centre
1,Tire circle cutter
( to cut and open the joint of tire's side and top )
Dimension(L×W×H) | 1300×900×1200(L×W×H) |
Production efficiency(tire/h) | 40(tire/h) |
Motor power(KW) | 3KW |
Motor rotating speed (r/min) | 1440(r /min) |
Voltage(V) | 380V |
Frequency (HZ) | 50HZ |
Machine weight (kg) | 300kg |
Size of applicable tyre | 650 -1200 |
2, Rims separator
it is used to separate the steel rims around the tire to avoid the harm to the machine.
Dimension(L×W×H) | 1300×900×1200(L×W×H) |
Production efficiency(tire/h) | 40(tire/h) |
Motor power(KW) | 3KW |
Motor rotating speed (r/min) | 1440(r /min) |
Voltage(V) | 380V |
Frequency (HZ) | 50HZ |
Machine weight (kg) | 300kg |
Size of applicable tyre | 650 -1200 |
3,Tire strip cutter
: it is used to cut the tire cirlce into strips 5x8 cm .
Dimension(L×W×H) | 1300×900×1200(L×W×H) |
Production efficiency(tire/h) | 40(tire/h) |
Motor power(KW) | 3KW |
Motor rotating speed (r/min) | 1440(r /min) |
Voltage(V) | 380V |
Frequency (HZ) | 50HZ |
Machine weight (kg) | 300kg |
Size of applicable tyre | 650 -1200 |
4,Tire slice cutter
: it is used to cut the strips into small chunks about 3.5 cubic centimeter.
Dimension(L×W×H) | 1300×900×1200(L×W×H) |
Production efficiency(tire/h) | 40(tire/h) |
Motor power(KW) | 3KW |
Motor rotating speed (r/min) | 1440(r /min) |
Voltage(V) | 380V |
Frequency (HZ) | 50HZ |
Machine weight (kg) | 300kg |
Size of applicable tyre | 650 -1200 |
5, XKP Tire Crusher (With 5Cr6MnMo rollers)
Application:It’s used for grinding the slice into smaller mesh powder through the vibrating screen as you need.
Model No. | XKP-400-BB | XKP-450-BB | XKP-560-BB | XKP-560L-BB |
Diameter of front roll | 400 mm (groove) | 450 mm (groove) | 560 mm (groove) | 560 mm (groove) |
Diameter of back roll | 400 mm (groove) | 450 mm (groove) | 510 mm (groove) | 560 mm (groove) |
Drum working length | 600mm | 760mm | 800mm | 800mm |
Front roll liner speed | 34.5 m/min | 38.0 m/min | 40.6m/min | 44m/min |
Roll ratio | 1:2.5 | 1:2.5 | 1:2.5 | 1:2.5 |
Max roller spacing | 10 mm | 10 mm | 10 mm | 10mm |
Motor power | 30KW/45KW | 45KW /55KW | 75KW | 110 KW/132KW |
Motor revolution speed | 980 r/min | 980 r/min | 980 r/min | 760 r/min |
Weight | 8 T | 12 T | 13 T | 25T |
Professional services
1.5 years experience in this filed
2.Credible quality ,durable
3.Customizable
4.Delivery in time
5. After tested this machine then shipping
why choose Odifei ?
1.Package:
Free-fumigation Safe Export Wood Case.
2.MOQ:
1set can be acceptable for Trail Order.
Over 3sets can enjoy the wholesale price.
Welcome to join us as our sales agent in your market.
3.OEM and ODM:
Changing on design or color: acceptable(welcome)
Develop on artwork and sketch : acceptable,could paste your own logo for your location markets
4.QC:
Third party inspection:acceptable
1 year guarantee for quality problems.
5.Delivery time:
1 week for Standard Model(motor:380v 50hz 3phases)
15-25days for Cusmoized Model.
6.Payment:
TT, 30% deposit ,70% before shippment.
L/C at sight (high bank charge, not suggest , but acceptable).
100%TT in advance (specially for air shipment or small amount).
Welcome:
Welcome to visite our factory at any time .
Contact Us
- Zhengzhou Odifei Machinery Equipment Co., Ltd.
- Contact nameEmma Yao
- Phone86-371-55679839
- AddressZhenghua Road,Jinshui District Zhengzhou,Henan
- Coarse Crusher
- mobile tire shredder
- tire shredder
- Silicone Mixing Mill
- Hydraulic Rubber Open Mixing Mill
- Twin-screw extruding and sheeting machinery
- N95 mask non woven fabric production machine line
- NBR/ACM/ EPDM straining from RS250 ram rubber strainer with 80/60 mesh from shanghai deren
- NBR/ACM/FKM/NR EPDM straining from RS150 ram rubber strainer with 300 mesh from shanghai deren
- RS150 ram rubber strainer with 300 mesh from shanghai deren for NBR/ACM/FKM straining
- RS150 ram rubber strainer with 300 mesh from shanghai deren for rubber compound straining
- RS150 ram rubber strainer with 100 mesh from shanghai deren for rubber compound straining
- RSH150 ram rubber strainer with 200mesh from shanghai deren for rubber compound straining
- RSH200 ram rubber strainer from shanghai deren for rubber compound straining
- RSH250 ram rubber strainer from shanghai deren for rubber compound straining
- RS150/200/250 ram rubber strainer from shanghai deren for rubber compound straining
- rubber products cooling conveyor from LSZ1050-L vibrating cooling conveyor with are chiller from shanghai deren
- rubber molded parts from LSZ1050-L vibrating cooling conveyor with are chiller from shanghai deren
- LSZ1050-L vibrating cooling conveyor with air chiller from shanghai deren for rubber molded parts
- LSZ1050-L Chiller vibrating cooling conveyor from shanghai deren for rubber molded parts
- LSZ1050-L Chiller vibrating cooling conveyor from shanghai deren for rubber molded parts cooling system
- LSZ1050-L Vibrating cooling conveyor from shanghai deren for rubber molded parts cooling system
- LSZ1050 Vibrating cooling conveyor from shanghai deren for rubber molded parts cooling system
- LSZ1050 Vibrating cooling conveyor from shanghai deren for rubber products cooling system
Popular Searches
- rubber injection
- rubber machinery
- conveyor belt vulcanizing machine
- braider
- vulcanizing press
- plate vulcanizer
- vulcanizing machine
- vulcanizer
- Bill Counter Machine
- rubber making machine
- badge machine
- badge making machine
- compression molding machine
- Financial Equipment
- coal pyrolysis
- continuous supply system
Recommended Products
- Suitable Sheep Machinery Hands Washing Device Slaughterhouse For Goats
- Good price Vovo D5D diesel engine for construction machinery
- Cheap price of used QY50K QY50K QY50K-II 50ton mobile Hydraulic type truck crane
- Biomass charcoal making machine for sale
- CE APPROVED 4-18 METER ELECTRIC SCISSOR LIFTERS
- E-traverse System Rubber Covering Machine
- CE APPROVED 1 TON ELECTRIC FORKLIFT
- L size hand former XL size nitrile gloves molds M size latex glove hand formers glove production machine
- labor glove molds hand glove formers automatic nitrile glove dipping machine
- construction machinery Cummins 74kw 4 cylinder machinery engine 4BTA3.9-C100 Engine Motor for sale
- Genuine vovo d4d EAE2 complete diesel engine for VOLVO EC140 excavator
- BRAZZOLIDYEING MACHINE(6 TUBES)
Find Similar Products By Category
- Machinery > Plastic & Rubber Machinery > Rubber Raw Material Machinery
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Emma Yao
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-