KL300PTO CE approved biomass peanut shell grass wood pelleting machine 8-70HP

Specifications

1.This series machine can be powered by tractor(PTO).

2.We adopt the new design of direct connection of motor shaft and he main shaft that overcome the loose defect of belt connecting as long time using.

3.High accuracy gearbox and high output.

4.It is widely used in large,middle, small scale aquatic. food and feed processing factory,

 livestock farm, poultry farm, individual raisers, middle and small farm.

5.International advance steam fittings and imported pressure reduction valve.

6.Flat die is made with international advanced equipment for long lifespan.

7.Drive with heavy duty gearbox, which can produce continuously in most adverse 

condition.

Guarantee

Our pellet mills are guaranteed with 1 year quality assurance from the date of goods shipment.

What is the terms of warranty and spare parts?

When we are talking about spare parts for a pellet mill, by and large, we are talking about die, roller and bearing. Practically, that how often you will need to renew spare parts is depending on what raw material you are making pellets from. Apparently, compared with making straw pellets, pellet mill that are making wood pellets requires a higher frequency for changing spare parts. We supply clients with high quality pellet mill dies, rollers, bearings and other parts. Clients are available to order at anytime. If you need spare parts, please contact me or test message.

Kinds of raw materials

Pellets as animal feed

0.8-8mm diameter die very suitable to make animal feed pellets.

The length can adjust according to your requirment.

Pellets as stove fuel

You have to prepare raw materials along with a flat die pellet mill which is used to press the materials into the needed fuel for home. There are a wide variety of raw materials that you can use to make the fuel, such as fruit pits, different types of grass, corn cobs, barley star, shelled corn, wheat, paper, etc. Your choice of materials decides the heating or cooking effect, thus you need to look up the kind of stove to properly match the pellet fuel.

What could I do if the pellet mill can't produce pellets?

A: New flat die pellet mill in first use may not produce pellets, because of the low smoothness of mould and bad cooperation in new devices. After using oily material for a period, the pellet machine can run smoothly.

B: The clearance between rollers and dies is too large. You can tighten the screw to narrow the gap to 1.5-2.5 mm.

C: Necessary steps to update a new die or roller shell because of wear and tear caused by long-term service.

D: The material is too wet or too dry, resulting in low productivity. You’d better increase or decrease the moisture to proper rate, generally 13%-16% in raw material.

CE CERTIFICATION

24 hours online service

As 7/24 email and phone call service is available, I am ready to answer your any specific questions regarding to our machinery and pellet mill in particular. In addition, we prepare the teaching videos in terms of installation, lubrication, trial running, parts replacements and so forth.

CONTACT INFORMATION

Whatsapp:+8615805353812