PTO beech wood sawdust pellet machine without motor

A: New flat die pellet mill in first use may not produce pellets, because of the low smoothness of mould and bad cooperation in new devices. After using oily material for a period, the pellet machine can run smoothly.

B: The clearance between rollers and dies is too large. You can tighten the screw to narrow the gap to 1.5-2.5 mm.

C: Necessary steps to update a new die or roller shell because of wear and tear caused by long-term service.

D: The material is too wet or too dry, resulting in low productivity. You’d better increase or decrease the moisture to proper rate, generally 13%-16% in raw material.

♦ Feed pellet machine is mainly used for producing animal feed pellets. Corn, bean pulp, straw, grass, rice husk, alfalfa, wheat stalk, etc.

0.8-8mm diameter die very suitable to make animal feed pellets.

The length can adjust according to your need.

For animal feed: The suitable raw materials for making feed pellets are corn stalk, peanut shells, maize straw and other farm wastes. Pellets made by the flat die pellet mill as animal feed can be stored for a long time. It can shorten the period of feeding, so it can efficiently guarantee many users' productive cost. Feed pellets are mainly supplied to cattle, chicken, pig, pets and other animals.

♦ Feed pellet machine is mainly used for producing animal feed pellets. Corn, bean pulp, straw, grass, rice husk, alfalfa, wheat stalk, etc.

♦2.5-10mm diameter die very suitable to make animal feed pellets.

♦The length can adjust according to your need.

♦Moisture content: The moisture content should be about 12%-20%, that is to say, the minimum moisture content is not less than 12% and the maximal moisture content is not more than 20%, or you will not get high quality pellets.