hot melt adhesive for nonwoven label,trademark

Specifications

hot melt adhesive usually uses for the nonwoven +fabric,leather,timber,paper,glass and plastic laminated etc.

The series of H065c hot melt adhesive is handle soft, which owns character is pressure low temperature hot ,bonding rang is very wide.Its performance index is as follows:

 

Product Type: H065c
Material: EVA
Product standard:thickness: 0.04 -0.30mm;
Width : 48-108cm
Thickness error rang: ±0.005mm
Melt range:60-80
Press-temperature:125-140
Press time:6-10s
Bonding area:no need to wash textiles,leather,non-woven,timber,paper,glass and plastic laminated
Laundry resistance: not washing
Substrate materials: double silicon release paper
Film appearance: semi- transparent
Package:100m/roll or it is up to request of the customer.

Note: Press temperature  and press time  are only based on the suggested arts and crafts condition,which is related to the pressing and warmming equipment,the conglutinanted material's thickness,the quotiety of warm-guiding,the pressure,and the users need to test and confirm it by specificed terms.

Note: The hot temperature and pressure of hot press time, only the proposed conditions, and the pressure of hot equipment and materials to be bonded, the thickness, thermal conductivity, pressure was the relationship between user needs experimental confirmation under specific conditions