transparent hot melt adhesive film 0.06mm

Specifications

hot melt adhesive film is coated on the backside of embroidery patch,different kinds of badges ,transfer printing faric etc .

The series H090 hot melt adhesive film is one of our main products , imported raw materials used formula,which own’s character is pressure low temperature hot ,easy to use .and non-crimp to fabric laminate. Its performance index is as follows:

 

 

 

 

Type: H090

Material:PO(polyolenfine)

Product standard:thickness: 0.04 -0.80mm;width : 48-108cm

Thickness error rang: ±0.005mm

Melt rang : 75±5C

Press-temperature: 110-140C

Press time:8-15s

Bonding area:embroidery badges,trademark,carftworks,shoes and caps,textile ,metal material etc

Laundry resistance: 40C common washing. it is related to the bonding fabric; Suggested a specific experiment to confirm.

Substrate materials: Single silicon release paper

Film appearance: Colorless transparent

Package:100m/roll or it is up to request of the customer.

Note: Press temperature and press time are only based on the suggested arts and crafts condition,which is related to the pressing and warmming equipment,the conglutinanted material's thickness,the quotiety of warm-guiding,the pressure,and the users need to test and confirm it by specificed terms.