transparent hot melt adhesive film for embroidery patch

Specifications

hot melt adhesive film H095 is usually using for bonding embroidery patch backside ,without higher wash resistance ,good quality

The series of H095 is one of our main products , imported raw materials used formula,which own’s character is pressure low temperature hot ,easy to use .and non-crimp to fabric laminate. Its performance index as follows:

 

 

Type: H095

 

Material:PO

Product standard:thickness : 0.06 -0.20mm;width : 48-108cm

Thickness error rang: ±0.005mm

Melt rang : 90 ±5C

Press-temperature(C): 140-160C

Press time:10-15 s

Bonding area:embroidery badges,trademark,carftworks,shoes and caps,textile ,metal material etc field

Laundry resistance: 40C common washing. it is related to the bonding fabric; Suggested a specific experiment to confirm.

Substrate materials: Single silicon release paper

Film appearance: Colorless semi-transparent

Package:100m/roll or it is up to request of the customer.

Note: Press temperature and press time are only based on the suggested arts and crafts condition,which is related to the pressing and warmming equipment,the conglutinanted material's thickness,the quotiety of warm-guiding,the pressure,and the users need to test and confirm it by specificed terms.