PO 0.06mm thickness of hot melt adhesive film for heat

Specifications

hot melt adhesive film is mainly using for heat transfer paper in popular in domestic and abroad.transperant &easy to bond.

The series H090 hot melt adhesive film  is one of our main products , imported raw materials used formula,which own’s character is pressure low temperature hot ,easy to use .and non-crimp to fabric laminate. Its performance index is as follows: 

 

 

Type: H090

Material:PO(polyolenfine)

Product standard:thickness: 0.04 -0.80mm;width : 48-108cm

Thickness error rang: ±0.005mm

Melt rang : 75±5C

Press-temperature: 110-140C

Press time:8-15s

Bonding area:embroidery badges,trademark,carftworks,shoes and caps,textile ,metal material etc

Laundry resistance: 40C common washing. it is related to the bonding fabric; Suggested a specific experiment to confirm.

Substrate materials: Single silicon release paper

Film appearance: Colorless transparent

Package:100m/roll or it is up to request of the customer.

As for application of hot melt adhesive film is heat transfer paper ,po,thickness 0.06mm is enough for heant transfer paper.

Note: Press temperature  and press time  are only based on the suggested arts and crafts condition,which is related to the pressing and warmming equipment,the conglutinanted material's thickness,the quotiety of warm-guiding,the pressure,and the users need to test and confirm it by specificed terms.