PO hot melt adhesive film for heat transfer paper

Specifications

hot melt adhesive film is mainly using for heat transfer paper in popular in domestic and abroad.transperant &easy to bond.

The series H090 is one of our main products , imported raw materials used formula,which own’s character is pressure low temperature hot ,easy to use .and non-crimp to fabric laminate. Its performance index is as follows: 

 

 

Type: H090

Material:PO(polyolenfine)

Product standard:thickness: 0.04 -0.80mm;width : 48-108cm

Thickness error rang: ±0.005mm

Melt rang : 75±5C

Press-temperature: 110-140C

Press time:8-15s

Bonding area:embroidery badges,trademark,carftworks,shoes and caps,textile ,metal material etc

Laundry resistance: 40C common washing. it is related to the bonding fabric; Suggested a specific experiment to confirm.

Substrate materials: Single silicon release paper

Film appearance: Colorless transparent

Package:100m/roll or it is up to request of the customer.

Note: Press temperature  and press time  are only based on the suggested arts and crafts condition,which is related to the pressing and warmming equipment,the conglutinanted material's thickness,the quotiety of warm-guiding,the pressure,and the users need to test and confirm it by specificed terms.