2014 best seller Peanut Shell Carbonization Stove Made in China

Specifications

Peanut Shell carbonization stove
1.Fast carbonize processing
2.High carbonize rate
3.Easy to operate
4.Green Tec

 

2014 Branch Carbonization Stove Made in China

 

 

we can carbonize peanut shell ,branch

,corncob,sawdust ,wood log,wood residue,coconut shell etc.

 

  

 

 

 

Character

 High carbon content and Green-Tec smokless  hardwood charcoal carbonization stove is ideal equipment for mass charcoal production. This type of smokeless carbonization stove adopts the structure of unique air storage chamber, to fully reuse the smoke produced during the process of carbonization. 60% of the redundant smoke can be used in drying and carbonization which saves energy and increases the enterprise revenue. 

 

 

 

Model	Weight(kg)	Capacity(kg)	Carbonization time(h)	Dimension
LTS-300D	2500	300	2--4	3.5*1.5*2m
LTS -600D	4000	600	4--6	4*1.5*2m
LTS -1000D	5000	1000-1200	6—12	5*1.6*2.2m

 

1

There are 4 steel drums at the top of the machine body. Under each drum, it’s a small room to make fire.

2

The 4 drums have lids on top, and in the middle of the lids, there also connect with 4 pipes, is used for gases to escape (gases will come out when heating the drum). This pipe is called the "retort." Fill the retort with the chunks of hard wood and place the lid on top.

3

Place wood and start the fire at the bottom of the drums. Place the retort inside the drum, resting it on the fire.

4

Wait for the fire to get really hot.

5

 It should be burning for about three hours and the smoke have been released, which means that the water, tar and other compounds in the hardwood chunks are being released. Keep the temperature up by occasionally adding wood to fire.

6

Watch for the smoke, which means the gases have been burned out. Pull the rods out to drop the retort into the burned wood and ashes, stopping the flow of air to the charcoal inside.

7

Wait an hour, then lift the retort out of the drums. Wear welder's gloves, as the retort may not be cool enough to handle. Place the retort in dirt and make  it to cool further.

8

After about two more hours, check to see if the retort is cool enough to touch. If so, remove the lid to check the results of your burn. If successful, the hardwood chunks inside should have reduced by about a third, and been converted to lump charcoal.

 

 

 

Type	Model	Capacity	Size	Temperature
Airflow	3.5 tons	500-1000 kg	4000 × 1500 × 2000 mm	500
	4.5 tons	1500-2000 kg	5000 × 1600 × 2200 mm	500
Spontaneous	3 m ³	1000 kg	2300 × 1600 × 2000 mm	450
	5 m ³	1300 kg	2500 × 1800 × 2000 mm	450
	8 m ³	1500 kg	3500 × 2000 × 2000 mm	480
	10 m ³	2000 kg	4100 × 2000 × 2000 mm	550

 

Certification of Our Factory and Products

 

 

Gongyi Lantian Machanical Plant has 28 years experience for Briquetting and Pelletizing solution. Sincerely hope to be your business partner.