Induction furnace Refractory Patching Material

Specifications

Refractory Patching Material
Easy to install
labour savings
Good performance for solidification and adhesiveness

Induction furnace Refractory Patching Material

1.This kind of repair material can be installed by spraying or daubing.

2.Show good preformance for high  refractability, slag resistance ,abrasion and corrosion resistance.

3. Application:indution furnace lining, Spout, top-cap etc.

 

Induction furnace repair refractory material

 

Benefits:
1) Excellent fluidity and plasticity, high refractoriness,
2) No need for any chemical additives, convenient installation to reach high

efficiency.
3) Reduce residue and porosity of the products, suit for all metal types.
4) Prolong the life cycle of induction furnace lining by maintenance.
5) Good performance to thermal shock, corrosion, erosion and abrasion resistance.

tems	HB-A(Plastic)	HJ-AM	HB-C
Main contents	corundum	corundum	spinel
Compressive strength	110°C×3h>29.2MPa	100°C×16h>2.6MPa	110°C×3h>21.6MPa
	1500°C×3h>68.5MPa	1400°C×3h>10MPa	1500°C×3h>56.9MPa
Refractoriness	2150°C	2300°C	1950°C
Density	2.88g/cm3	2.45g/cm3	2.79g/cm3
Plasticity	good	excellent	good
Solidification	good	good	good
Additive	--	--	water
Installation mode	trowel or ramming	trowel	trowelorspray
Application	plastic material for spout and top-cap of induction furnace; maintenance material for induction furnace	maintenance material for horizontal and vertical cracks of induction furnace	maintenance material for induction furnace