Contact Platform Support
Help CenterHorizontal Continuous Casting Electrical Tube Furnace for Brass Copper and Bronze
Related Products
-
Horizontal Continuous Casting UnitUS$ 100,000 - 1,000,000MOQ: 1 Set -
Copper Aluminum Magnesium Alloy Induction Electrical Melting FurnacesUS$ 30,000 - 150,000MOQ: 1 Set
-
GWJ Aluminum Intermediate Frequency Coreless Melting Electrical FurnaceUS$ 10,000 - 100,000MOQ: 1 Set
-
Induction Melting and Hold Furnace Spare Parts for Brass Copper BronzeUS$ 1,000 - 10,000MOQ: 1 Piece
-
Induction Electrical Melting and Hold Furance Spare Part With Brass Bronze Alloy CopperUS$ 100 - 10,000MOQ: 1 Set
1 Brief Introduction of Plant
Wuxi Xishan Electric Furnace Plant is located in Bashi, Xibei Township, Wuxi City, Jiangsu Province, China. It was founded in 1982 . Engaged in the research and innovation of electric furnaces ever since its foundation, it has procured a profound knowledge for the design and manufacture of electric furnaces. With 30 years of practical experience amassed and the assimilation of advance technologies of foreign countries in the furnace making, it has never stopped its efforts in its innovative work for perfection. Therefore it is widely acknowledged by the profession and praised for its good reputation.
It mainly serves non-ferrous fabrication industry with its products including mains frequency induction melting furnaces both with and without cores, medium frequency induction melting furnaces, vacuum induction melting furnaces, and related equipment including horizontal continuous casting units for tubes, bars, strips of copper and its alloys, semi-continuous vertical casting units, upward drawing units for rods of oxygen free copper, bell type annealing furnaces, pot type and chamber type annealing furnaces,stretch levelers for finished strips and heating furnaces for copper bars.
2.horizontal continuous casting electrical tube furnace for brass copper and bronze
Billet diameter: |
φ10-φ300mm |
Billet length: |
From5000mm |
Number of strands: |
1-4 |
Materials: |
Copper alloys,copper-nickel,dhp copper,etc |
Production capacity: |
Up to 80t/day |
Operators needed: |
1~2 per shift |
A typical horizontal continuous casting unit for copper tubes consists of a mains frequency cored melting-holding combined furnace with metal flowing under surface, a crystallizer, a cooling water distribution system, a servo control withdrawal system, an in-line synchronous saw, a saw for mold changing, a hydraulic system and an electric control system, etc.
A typical mains frequency furnace adopts a new combination structure of melting-casting with metal flowing under surface. The inductor adopts a vertical structure with silicon sheets imported. As the molten metal flows from the melting furnace to the holding furnace under the surface, the heat emission (that would be otherwise caused) is avoided so as to reduce the energy consumption. Meantime, the metal loss is also reduced. As the exposure of the molten metal to the air is substantially reduced, the product quality can be stabilized and enhanced. The parameters of the melting-holding furnace like voltage, amperage, effective power and compensation factor are indicated with signals. The metal temperature in the furnace is continuously measured and displayed. Also indicated are the temperatures and pressures for the water for cooling the inductor coils, wrapping sleeves and cables with necessary optic and acoustic alarms equipped.
Send Inquiry to This Supplier
You May Also Like
-
Drum Weigh/Inspenction/IsolationNegotiableMOQ: 1 Set
-
Automatic Brick Making Machine Equipment Cement Brick Making Machinery From China Construction Compressed Brick Making MachineUS$ 399 - 1142MOQ: 1 Set
-
Genyond Automatic GREEN Peas RED Beans RICE Destoner Machine Stone Removing Machine RemoverUS$ 2800.00MOQ: 1 Set
-
Automatic Flexo Printer Wastewater Treatment SystemUS$ 2000 - 20000MOQ: 1 Set
-
Tu0 C1011 C10100 C110 Pure Copper Bar Customized Industrial Seamless Good QualityNegotiableMOQ: 1 Ton
-
Basement Dehumidifier System Precision 20l HumidityUS$ 1 - 10000MOQ: 1 Piece
-
New-Style Rebar Double-Shaft Shredding Production Line, Oil Drum Double-Shaft ShredderUS$ 6531MOQ: 1 Set
-
Large Gantry 5-Axis CNC Milling and Turning Service for Aluminum and Plastic PartsNegotiableMOQ: 100 Pieces
-
Perkins Engine 404-22 Original Brand New 4-cylinder GN71039 24.3KW/1800CNegotiableMOQ: 1 Piece
-
Metallographic Sample Thin Section Equipment/Specimen Cutting MachineUS$ 22183.35 - 23093.07MOQ: 1 Set
