Bell-type annealing furnace

     Wuxi Xishan Electric Furnace Plant is located in Bashi, Xibei Township, Wuxi City, Jiangsu Province, China. It was founded in 1982 .

    It mainly serves non-ferrous fabrication industry with its products including mains frequency induction melting furnaces both with and without cores, medium frequency induction melting furnaces, vacuum induction melting furnaces, and related equipment including horizontal continuous casting units for tubes, bars, strips of copper and its alloys, semi-continuous vertical casting units, upward drawing units for rods of oxygen free copper, bell type annealing furnaces, pot type and chamber type annealing furnaces, stretch levelers for finished strips and heating furnaces for copper bars.

  Forced-convection Bell-type Bright Annealing furnace

   Products and capacity          

  Forced-convection Bell-type Bright Annealing furnace

  - Loading diameter:    Φ800-Φ3,500mm

  –Loading up to            4,500mm in height

 Materials:                       strips of copper and its alloys, steel strip, etc.             

 Operators needed:       1-2 per shift

 Advantages of our bell-type bright annealing furnace

 Only W shaped flat heating elements are used for the heating bells, which are not easily damaged .

 Only silicate cotton is used as the heat insulating material for the heating bells so that the bells are light and easy to handle without damaging the internal materials. By so doing, the heat insulation and hence the heat efficiency of the heating bells are improved and the energy consumption is reduced.

 The stainless nails used for the heating elements of the heating bells are completely insulated from the shells of the bells.