Weifang chicken farm poultry equipment broiler chicks rate

System              

Main Function

1. Main feeding system     

Convey feed from silo/ manpower hopper (outdoor) into each feeding line vice hopper (indoor) automatically.

2. Pan feeding system      

Convey feed from vice hopper into each feed pan automatically. The motor will start working and convey feed when sensor doesn't touch feed, the motor will stop working when sensor touchs feed.

3. Nipple drinking system                     

Supply clean water to each drinking line steadily, the water will be out when chickens touch nipples.

4. Ventilation system    

Control climate condition, 50'' fans will work with cooling pads to reduce indoor temperature, 36'' fans will work with air inlets to exchange air, to provide the most comfortable growth environment for different stage chickens, ensuring your chickens provide maximum production.

5. Cooling pad system                                       

When air goes through cooling pads, the heat will be taken down by the evaporation of water, so the air will be cooled before going into chicken farms. The ventilation fan——cooling pad combination way is the most economical and effective way to reduce temperature of chicken farm in Summer. The application shows that, even in the hottest weather, the reasonable-installed ventilation fan——cooling pad system can control the indoor temperature at around 30 degrees Celsius, thus minimum the impact which may occur to the poultry.

6. Environment control system

Control the indoor temperature by controlling ventilation fans, cooling pads, air inlets even heater automatically, also control the light, water and feeding.

7. Spraying system

Reduce temperature, increase humidity, clean and disinfect chicken farms.

Warm chicken farms, especially for day-old chicks. 

9. Poultry Slat floor system

Provide comfortable and durable plastic floors for chicken raising.

10. Curtain system

Keep out the sun and adjust ventilation, commonly used in open-type poultry farms.

Feed silo

(Option 1)

Manpower hopper

(Option 2) 

Feed silo:

1). Silo with standard ladder and guard railing, safe and reliable;

2). Firm connection and good sealing performance;

3). Galvanized steel sheet, more than 10 years service life.

4). Size: 3T, 5T, 8T, 10T, 15T, 18T, 20T.

Manpower hopper:

1). Galvanized steel sheet;

2). Size: 600Kg, 800Kg

Power: 0.75Kw

Voltage: 380V/220V/customized, Three-phase/Single-phase

Frequency: 50Hz

Feed conveying pipe

with auger inside

Diamater of conveying pipe: Φ75mm, Material:PVC

Helical spring auger: imported from South Africa, feed ability:1400Kg/h

Conveying length: 60m

Vice hopper

Size: 70Kg, 90Kg;

Material: hot-dip galvanized sheet, thickness: 1mm

Drving motor                                                                                              

Power: 0.75Kw/1.1Kw/1.5Kw,

Voltage: 380V/220V/customized, Three-phase$2FSingle-phase

Frequency: 50Hz, AC current

Feed pipe:

Diameter of feed pipe: Φ45mm

Material: hot-dip galvanized sheet pipe with the zinc coating amount—more than 275g/m2.

Helical spring auger:  imported from South Africa, feeding ability:400Kg/h

Feed pan:

Feeding line specification: 4 feed pans/3m, 3 feed pans/3m

Feed pan capacity: 50-55 broilers/pan

imported from Germany, time delay range: 0-2hours

The sensor is usually installed at the end of each feeding line which controls motor on and off to achieve feed delivery automatically. The motor will start working and convey feed when sensor doesn't touch feed and will stop working when sensor touchs feed.

It's very convenient to adjust the feeding line height by winch.

Waterline front system                                                           

Front part is controller of water, which is usually installed in control room.

*Pressure regulating valve: to make sure to supply stable water to drinking lines.

*Filter: clean water and avoid blocking nipples.

*Water meter: to measure water usage volume.

*Doser(Medicator): add medicine to drinking system automatically to prevent disease.

Good regulating stability; High switching performance; water supply is sufficient&equality; Recoil cleaning with good cleaning result, save time and water; Good quality movable valve, easy to change.

Nipple drinking lines

Nipple:

The outside shell is made of high quality plastic, the valve rod is made of high quality stainless steel.

a. Anti-corrosion, service life over 10 years;

b. Double-sealing structure, avoiding water leakage and its bad influence to chicken farm;

c. Valve rod can be movable in 360 degrees, easy to drink;

d. Meet eating demand of different stages chickens.

Drip cup:

Material: pure engineering plastic—PP.

a. One-arm design, more suitable for modern poultry idea;

b. Tight to water pipes, won't drop when touching in cold weathers.

PVC square water pipe&galvanized supporting tube

Drinking line specification: 15 nipples/3m, 12 nipples/3m

Nipple drinker capacity: 8-12 broilers/drinker

Use high transparency&impact resistant material, sturdy and durable, convenient to observe water level.