platform steel grating

Specifications

platform steel grating

brief introduction 

1)The treads are called "pedal ladders, steel ladders, stairs treads" is manufactured by processing steel grating ,steel grating is made by flat steel and bars according  to spacing cross-arranged and welded into the middle with  square mesh )

2)The surface of the treads generally with hot dip galvanized or cold galvanized.

3)Classification:according to  the front fender and ladder beam connection express as T1, T2, T3, T4, T5, T6

T1 front fender of (fixed welding)   

T2 front guard plate (bolted)
  

T3 checkered plate front fender (welding fixed)

T4 checkered plate before the guard plate (bolted)
    
T5 Stripboard front fender (fixed welding) T5 Stripboard guard (welded fixed)

Recommended as far as possible from the economic point of view, the modulus width (Series 1 125,155,185,215,245,275, Series 2 125,165,205,245,275 mm) 100mm multiple of the length (such as 500,600,700,800,900,1000,1200 mm).

Treads Tolerance: width W ± 3mm, length L-3mm.

The treads (ladder pedal), type:

(1) According to the ladder pedal installed into welding fixed ladder pedal pedal bolt ladder. The welding fixed ladder pedal that steel grating, bolted ladder pedal steel grating plus 65X5mm flat steel as the side panels.

(2) have the front fender (checkered plate or bars) ladder pedal and the front fender ladder pedal anti-slip requirements can be divided into two ladder pedal. T325/30/100 (applies to the ladder tread width is greater than 215mm is not greater than 305 mm) T255/30/100 ((applied to the the ladder tread width greater than 215mm less than 305mm) Note: For security reasons, it is recommended that customers using with front shield ladder treads. The treads (ladder pedal), type:

(1) According to the ladder pedal installed into welding fixed ladder pedal pedal bolt ladder. The welding fixed ladder pedal that steel grating, bolted ladder pedal steel grating plus 65X5mm flat steel as the side panels.

(2) have the front fender (checkered plate or bars) ladder pedal and the front fender ladder pedal anti-slip requirements can be divided into two ladder pedal. T325/30/100 (applies to the ladder tread width is greater than 215mm is not greater than 305 mm) T255/30/100 ((applied to the the ladder tread width greater than 215mm less than 305mm) Note: For security reasons, it is recommended that customers using with front shield ladder treads.

Treads and tread plate and grille of steel grating has the following advantages:

Saving material: the province of the material to withstand the same load conditions, and accordingly, can reduce the material of the support structure.

Reduce investment: saving materials, Province the artificial, Province duration, free cleaning and maintenance.

Construction is simple: in the pre-installed support on national folder with bolt or welding to complete one.

Save Duration: No on-site reprocessing, installation is very quick.

Durable: the factory by the hot-dip zinc treated with preservatives, impact resistance and stress ability.

Modern style: beautiful appearance, design specifications, air and light, giving a sleek, contemporary feel to the whole.

Light structure: the timber is small, light and easy lifting.

Anti-plot dirt: the plot is not the rain, snow and dust.

Reduce wind resistance: good ventilation, the case of wind drag, reducing wind damage.

The design is simple: No small beam, simple structure, designed to simplify; without detail design of steel grating, can only

specify model factory on behalf of clients design exhaust plate Figure.